Saddleback Plumbing Heating & Air Blog: Archive for the ‘Services’ Category

Heat Pump Filter Care

Monday, March 21st, 2011

On the whole, heat pumps are efficient, durable and effective. They are built to run all year round without needing any more maintenance than your average furnace or air conditioning system and they have an average lifespan comparable to those other types of home comfort systems as well.

That’s not to say that there aren’t things you can do to keep your heat pump in good working order, however. Keeping up with the professional maintenance visits is an important step to take along these lines to be sure, but there are also some other things you can do on your own as well to help ensure the continued efficiency and health of your heat pump system.

Proper filter care is an important part of keeping your heat pump working the way it should. If you don’t have a heat pump yet but are thinking of getting one, make sure you have the installation technician show you where the filter is located and how to replace it.

If your system’s already been in place for some time, you can still find out how to care for the filter from your annual maintenance technician or you can probably even find it on your own by taking a close look at your heat pump. The filters are meant to be removed on a regular basis so they’re typically not hard to get to. However, you should always be sure that all of the power to your heat pump is turned off before you open it up to try and find, replace or clean the filter.

Most heat pump filters are meant to be changed or cleaned about once every 90 days or so. However, the specific requirements for each system can vary considerably, so you should be sure to find out what is recommended for the model of heat pump that you have.

Also, you’ll want to know what type of filter you have so that you can purchase the appropriate replacement. The model number for each filter should be clearly printed on it, so simply slide your current filter out and make note of the number so that you can purchase the correct type as a replacement.

Most heat pumps have replaceable filters, but some still do have permanent filters that are meant to be cleaned and then returned to service. If you have one of these types of filters, be sure to read the instructions for cleaning carefully before proceeding.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Heat Pump Filter Care

Furnace Fan Doesn’t Run? Why Is That? What Should You Do?

Friday, March 18th, 2011

There are several reasons that a furnace fan might stop working at one point or another. While many of these do require professional attention, there are probably some things you can check on your own before you go and call in the pros. After all, if you can address the problem on your own, it will at least save you from having to pay a technician to come out.

The first thing to check when your furnace is running but the fan isn’t turning is whether or not the fan is actually switched on. Certain models of furnaces have a separate switch to turn the fan on and off. While there is probably no reason that you would want to turn off the fan by itself, it’s worth taking a look just in case. If that really is the problem, you’ll be up and running and back to dealing with better things in no time.

If that’s not the problem, you might try looking to see if any wires leading to the fan are loose or the fuse is blown. If the fan has no power, of course, it won’t be able to work but the rest of the furnace likely would work just fine as long as it doesn’t run on electricity as well.

Of course, the problem very well may be beyond your power to solve on your own. Don’t despair though. Even though you need to call in a professional, that doesn’t mean that the problem will be expensive to fix. In fact, it may be as simple as replacing your thermostat or the motor for the fan itself.

Just because a fan isn’t working doesn’t mean that you’re going to be paying an arm and a leg to have work done on your furnace. If you can’t easily discover the problem on your own, however, or if you’re not comfortable inspecting this type of equipment at all, you’re generally better off just calling in an expert and letting them do the dirty work for you. Paying for simple furnace fan repairs is definitely preferable to having to pay someone to fix the fan and the stuff you broke yourself while trying to fix the fan on your own.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Furnace Fan Doesn’t Run? Why Is That? What Should You Do?

Cleaning the Heating Coil: It Can Save You Repairs Later

Wednesday, March 16th, 2011

Just like any piece of equipment, your furnace needs some regular attention and maintenance to keep it running right. And one of the most important parts of the furnace to pay attention to during these service visits is the heating coil.

Without the heating coil, your furnace simply won’t be able to put out heat to keep your house warm. That’s because the combustion in the furnace is used to heat the coil. Air is then blown across the heating coil so that it can be warmed before being circulated throughout the house.

If your heating coil isn’t kept clean, it’s easy to see how you could wind up with all types of problems down the line. And since air is constantly being blown across the coil when the furnace is at work, it’s particularly susceptible to accumulating buildups of debris and sediment.

When this happens, there are several consequences. First of all, your furnace will have a harder time heating your whole house and heating it evenly. As a result, all of the parts of the furnace will have to work overtime to keep your home warm and this can cause them to wear out and break faster. Of course, when that happens, you’ll need professional repairs to get you back on track and you may have to go without heat for some time in the coldest part of the year.

Also, a dirty heating coil won’t be as efficient at transferring heat to the air blowing past, meaning that you’ll be getting less heating power out of the fuel your furnace is consuming to heat your home. Essentially, this will mean your furnace is not functioning at peak energy efficiency and that will certainly be reflected on your monthly heating bills.

But all of this can be avoided by keeping your heating coil clean and in good repair. You will likely need to have a professional take care of this for you and it is a standard part of an annual maintenance visit. While you may have to pay a bit each year for that regular maintenance, you’ll be much better off and save a good deal of money in the long run by having it done and your coil cleaned.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Cleaning the Heating Coil: It Can Save You Repairs Later

What Is AFUE and Why Should I Care?

Monday, March 14th, 2011

If you’ve been shopping for a furnace, chances are you’ve noticed that each furnace has its own annual fuel utilization efficiency (AFUE) rating. These generally range from 80% to the high 90% s and the higher the number, the more fuel efficient that particular furnace is.

But what does this number really mean and just how much should you care? Well, the AFUE rating should actually have a significant impact on your furnace purchasing decision, but that doesn’t mean that you’ll always choose the furnace with the highest efficiency rating either.

For one thing, you’ll have to recognize that not every type of furnace is capable of running at the highest efficiency levels. Oil furnaces, for instance, can’t compete with the super high efficiency gas furnaces on the market today. That’s not to say that an oil furnace might not be the best choice for you under certain circumstances, but it does mean that you should take a close look at your furnace usage before you make a decision.

If you do choose a gas furnace, you will of course have the option of getting one that can reach up to 97% or so efficiency. However, that may not always be the best choice either. If you live in a place where with very harsh, long winters and you’re going to be using your furnace heavily, then it’s definitely worth investing in a higher AFUE furnace that can save you considerable amounts on your monthly heating bills.

But if you don’t use your furnace too often as your area has more mild winters it’s probably not worth it for you to invest in such a high efficiency product. That’s because the higher the AFUE of the furnace, the more expensive it is to purchase and install. Certainly you’ll save money every month because you’ll be getting more heat out of the fuel you’re paying for. But if you don’t use your furnace all that much, the savings really won’t be that substantial.

Don’t forget that a furnace with an 80% AFUE rating is still quite energy efficient. And once you get up that high, you have to use your furnace a lot for the difference between 80% and 90% to really become apparent. So if you don’t use your furnace heavily during the winter, it will take you many, many years to make up for the higher purchase price of the 90+% AFUE models.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on What Is AFUE and Why Should I Care?

Installing Drainage System: Why Call a Plumber?

Friday, March 11th, 2011

A proper drainage system is a great asset when you are trying to improve the appearance of your lawn or increase your landscaping options. A lawn that does not drain right will have dry and wet spots that make it difficult for plants to grow. Your lawn will develop a spotty appearance because of these types of areas and you will probably also have a smaller area to work with in general.

With a good drainage system, on the other hand, you can make use of your entire yard. As long as water can reach all areas but does not linger too long in any one of them, all of your plants should be able to grow nicely. This is often a project that handymen are inclined to take on themselves, but there are several potential pitfalls when you do. It may not seem all that complicated to put in a drainage system, but you do need to know what you are doing if you want to get the job done right.

In order to function properly, a drainage system needs to be installed on a slope. Water will always run downhill, so making your drainage system run downhill will ensure that gravity will do all the work for you. If the proper slope is not maintained, however, there are plenty of areas where water can pool.

That is exactly the type of situation you are trying to avoid by putting the drainage system in, so all of your hard work could be for nothing if you do not get the slope calculated correctly. While this type of measurement and calculation can be challenging for you, it is second nature to a professional plumber. Hiring an expert to help you with this area of your drainage system is the best way to make sure you have the right setup planned.

You will also need to know where to lay out the drainage system. This involves analyzing the sources of water in your yard and understanding what you need to do to move it from one area to another. Again, this can be a challenging if not overwhelming aspect of the project for a layman, but for a professional it is simply part of the job.

On top of all of that planning, you will need to have the right tools and materials to put the drainage system together. Plumbers already have all of this on hand and they know which tool to use when. Your project will go much more smoothly and you will be assured of much better results if you use a professional to install your drainage system.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Installing Drainage System: Why Call a Plumber?

How a Water Softener Works

Wednesday, March 9th, 2011

You use water for many things. It is necessary for bathing, cooking, washing clothes and for drinking. But the water we use in our homes is not pure. It has plenty of other minerals and additives suspended inside. While some of these, like fluoride, are intentionally added to the water supplies in certain areas, some others get in by chance.

Aside from actual pollutants, the additives you may be the most concerned about finding in your water are calcium and magnesium. These minerals are picked up by water as it moves through the ground, and the more of them that get into your home water supply, the harder that water will be.

The term hard water is used to describe water with high levels of calcium and magnesium present. These minerals are not actually dangerous to us, but they can cause all sorts of problems for your indoor plumbing and other household systems. For instance, hard water will leave deposits of these minerals on the insides of pipes and on sinks, faucets and bathtubs.

Residue will also build up in appliances like coffee makers, dish washers and washing machines. Over time these buildups can become a real problem and you may have to pay for costly repairs or need to replace large appliances.

In order to avoid these types of complications, your best bet is to have a water softener installed. These systems can be connected directly to your home water source and they are able to remove excess calcium and magnesium from the water before it ever reaches any of your indoor plumbing or appliances.

Water softeners generally remove these minerals by attracting the positively charged calcium and magnesium particles with a tank full of negatively charged polystyrene particles. In this system, the calcium and magnesium are replaced by sodium ions as they move through the water softener, thereby maintaining the overall balanced composition of the water. Once the water has passed through and the calcium and magnesium have been left behind, the water softener will flush them out and prepare to absorb another wave of hard water minerals.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on How a Water Softener Works

How Hard Is Your Water?

Monday, March 7th, 2011

The hardness or softness of water varies considerably from one part of the country to another. What we really mean when we talk about hardness is how much calcium and magnesium carbonates are present in the water. The more of these minerals there are, the harder your water will be. While the fact that your water is harder does not mean that it is unsafe, it is good to know what you are dealing with.

There are several ways to find out how hard or soft your water is. You may simply be able to call your local municipality and get the results of the tests they perform. You can also purchase a water hardness test kit pretty easily and some water softener services even perform free hardness testing on mailed-in samples.

Water that is too hard can cause problems for washing machines because it interferes with the chemical functioning of many detergents. And water that is too hard will leave deposits behind on fixtures, sinks, tubs and anything else it comes into contact with. Over time, these deposits can clog up pipes or make their openings smaller, effectively reducing water pressure.

Deposits are also good at clogging up shower and faucet fixtures and they can even build up in your washing machine which will cause some real damage down the line. Using hard water for cooking can create some unwanted complications as well.

Fortunately it is relatively easy to eliminate hard water problems. There are many companies that offer a variety of water softening services. There are water softeners that can be attached to your home water source to treat the water as it comes in and remove any excess chemicals that the water has. These water softeners are an excellent option when you are struggling with very hard water.

Of course, these water softeners can also wear out and become clogged with buildup over time, so you will want to look for a water softening service company that provides full service replacement and repair programs as well.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on How Hard Is Your Water?

Save by Caulking Crevices and Penetrations

Friday, March 4th, 2011

They are nothing to be ashamed of. Really, everyone has them. You know – those little cracks and crevices that you always mean to get around to caulking but just have not found the time for yet. But they are so small, they cannot possibly be causing that many problems, right?

Well, not exactly. In fact, any small space that can let air in or out of your house could be costing you money – and a considerable amount too. The truth is that, next to inadequate insulation, leaks and drafts are some of the biggest drains on your home heating and cooling system.

After all, you are paying to heat or cool the air inside your house in order to keep the indoor environment comfortable all year round. But you do not want to be paying more than you need to be. That is why you bought the high efficiency HVAC system in the first place. If you have lots of drafts and cracks in various places throughout your house, however, you are almost certainly spending more than necessary to keep your house comfortable.

And the solution is so simple. You do not need to go out and spend a ton of money on an even more expensive heating and cooling system. All you really need to do is make sure that your home is sealed up as well as possible. And that means sealing up all of the cracks.

Caulking is an extremely effective way of doing this, and it costs very little, particularly if you take on the job yourself. But even if you hire a professional, the amount that you have to pay out will be returned to you many times over in savings on your monthly heating and cooling bills. There simply is no substitute for sealing up your house tight when you are trying to save money on heating and cooling costs.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Save by Caulking Crevices and Penetrations

Save with Maintenance on HVAC

Wednesday, March 2nd, 2011

You can never save too much money by making improvements and taking steps around the house. Of course, it is hard sometimes to see exactly where the money saving opportunities are. That’s because you expect to spend a certain amount on various types of services when you own a home. You know you are always going to have heating and cooling bills, for instance. But are they higher than they need to be?

For many people, the answer to that question is “yes.” And it is not because they use their home heating and cooling systems inappropriately or because they have the wrong equipment. It is simply because they neglect to get their HVAC systems the regular care and maintenance that would keep them running at peak effectiveness and energy efficiency.

When your HVAC system is new, it runs well and can be remarkably energy efficient. However, over time that energy efficiency will gradually deteriorate. This drop off in efficiency is often not obvious at first, but if you compare your energy bills from the year you got your system to bills for the same time of year and same usage five years later, you will probably notice that the bill has gone up quite a bit, and not just because energy prices have gone up.

You can do a lot to prevent this loss of energy efficiency, though, if you simply have a professional HVAC technician come out once a year and give your system a tune up. During this type of maintenance service, the technician will check over your entire system looking for worn out parts and buildup that could be interfering with your system’s performance.

They can clean out any areas of your HVAC equipment that require it and they will be able to make any necessary repairs at that time. Often, a technician performing this type of maintenance will be able to catch minor issues before they are able to develop into bigger problems. And while you still have to pay for the maintenance visit, the cost is much less than what you would pay for an emergency repair.

It also represents a substantial savings over what you would be paying on your energy bills every month without it. Regular HVAC maintenance can preserve the vast majority of your system’s energy efficiency loss over time, and it is never too late to start. Even if it has been several years since you had your system installed, you will still be able to get back the vast majority of your original energy efficiency by starting with regular maintenance now.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Save with Maintenance on HVAC

Bathtub Replacement: Why You Should Call a Contractor

Monday, February 28th, 2011

A bathtub replacement is not something you will have to worry about every day. However, there will likely come a time when you do need to get rid of your old tub and put in a new one. Whether your old tub is simply beyond repair or you just decided that it was time for a change, putting in a new bathtub is a significant undertaking.

Even if you have considerable plumbing skills, you would do well to hire an outside contractor to take care of a bathtub replacement or installation project. There are a lot of factors to take into account when you are installing a bathtub in your home, and experienced contractors know what to look for and how to adjust to the various situations that can arise.

For one thing, you will probably have a very hard time physically moving both the old tub being replaced and the new on that needs to go in. And even if you are physically capable of moving this type of heavy equipment, you will still run the risk of damaging other parts of your house in the process. A skilled contractor with a team can much more easily get an old tub out and a new tub in place.

Plus, when you hire a contractor for this type of work, you will most likely not have to worry about how to dispose of your old tub once you are done with it. The majority of contractors will take care of this type of disposal for you, which is a big help since you probably do not want an old bathtub sitting in your yard indefinitely.

Another thing to consider is that the plumbing work needed to properly put a bathtub in place is rather complicated. You need to have relatively advanced plumbing skills in order to carry it out properly. And if you do not manage to complete a proper installation, you will have no end of problems later on. It is well worth the investment to have a contractor come in and install your bathtub when the alternative is paying for more costly repairs later on.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Bathtub Replacement: Why You Should Call a Contractor