Saddleback Plumbing Heating & Air Blog: Archive for the ‘Services’ Category

Basic Furnace Safety Tips

Friday, January 20th, 2012

While you should schedule a yearly maintenance visit with a qualified HVAC technician to check for any safety concerns, you can also reduce potential safety hazards in the heating system of your Dana Point home. Whether you have a furnace or a heat pump, you can substantially decrease the chances of dangerous situations with a few minor routine tasks.

If you have any questions about how to better maintain your heating system, give us a call to speak with one of our expert HVAC technicians. Here are a few guidelines to get you started.

Ventilation in Forced-air Systems:

  • Regularly vacuum and clean out your heating vents and fan blower.
  • Check the condition of your chimney and vent pipe to make sure that none of the parts are damaged or show signs of deterioration.
  • Test the thermostat occasionally to make sure your heating system is working at optimal levels. There could be a safety concern if your heater is not properly heating your home.

Heat Exchangers:

  • Heat exchangers should be inspected often to prevent carbon monoxide leaks. Check for any obvious issues, such as rust or other damages.
  • The heat exchanger for furnaces should be inspected by a professional once a year in case there are hidden problems with the equipment, or if any of the components need to be replaced.
  • Check the pilot light in gas furnaces for any flickers or changes in color. Have someone turn up the thermostat while you watch the light, but turn off the system for five minutes first. If there are any changes, there could be a problem with the heat exchanger. Call a professional if you suspect issues with your heat exchanger.

Heating Equipment Inspections and Adjustments:

  • Adjust the temperature settings if you suspect that the heater isn’t working properly, and if it doesn’t work call a professional heating technician, or if you aren’t sure how to locate or adjust the controls.
  • Check the overall equipment for cracks, rust, or any other obvious signs of damage or deterioration that could create safety hazards.

In addition to performing these tasks, call a licensed Dana Point heating contractor to inspect your heating system at least once a year.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Basic Furnace Safety Tips

Balboa Heating Installation Question: What Makes a Furnace High Efficiency?

Wednesday, January 18th, 2012

You’ve probably heard about the new lines of high efficiency furnaces being released by popular home heating companies in Balboa, but what exactly is different about these high efficiency devices from your current furnace? Let’s take a closer look at what a high efficiency furnace offers and why it can save you money.

Added Features

A high efficiency furnace uses familiar technology in a new way to reduce the amount of energy lost when combustion takes place. This means:

  • Sealed Combustion – Instead of open combustion which allows heat to escape during and after the combustion process, a high efficiency furnace uses a sealed chamber with carefully measured and fed airflow to burn fuel and produce heat. Exhaust heat can then be recaptured and used to heat air transferred to your air vents.
  • Two Stage Gas Valves – With a two stage gas valve, your furnace can respond to the temperature outside. There isn’t just one “on” switch. The furnace will regulate gas flow based on how much energy is needed to produce heat for your home. So, if there is a sudden burst of cold outside, the furnace will respond accordingly, but for most days when heating needs are low, it will use only the minimum amount of needed gas.
  • Programmable – High efficiency furnaces are now programmable, meaning you can set specific time limits for operation, change thermostat settings digitally and inspect the device through an electronic read out. The level of control given to you by a programmable high efficiency furnace can greatly reduce gas or electricity consumption.

Cost Benefit

The real reason many people are interested in high efficiency furnaces is that they are so much less expensive to operate. Instead of costing hundreds of dollars to run through the winter, they operate the bare minimum needed to heat your home. Using up to 95% of the fuel they consume to produce heat and regulating gas to cut how much is consumed during milder days, these furnaces are built to save you money.

If you have an old furnace in your Balboa home that chews through energy like nobody’s business, now might be the time to consider the benefits of a brand new, high efficiency model.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Balboa Heating Installation Question: What Makes a Furnace High Efficiency?

Happy Martin Luther King Day

Monday, January 16th, 2012

Happy Martin Luther King Day! This holiday is not just about celebrating civil rights but also about serving your community. If you have the day off today, why not try spending it helping others? From volunteering at an animal shelter to helping the homeless, there are hundreds of ways you can make your community a better place to live. Have a great holiday!

Continue Reading

Tags:
Posted in Services | Comments Off on Happy Martin Luther King Day

Woodbridge Heating Guide: Furnace Fan Limit Switch

Friday, January 13th, 2012

When researching your Woodbridge furnace and potential problems it might have, you’ve probably run across a few references to the fan limit switch. And while you know that it can break in a number of ways, do you know what the switch does and what you should look for when checking your furnace its air handler for problems?

What the Limit Switch Does

To put it very simply, the furnace fan limit switch is a control that tells your furnace’s fan when to turn on and off. So, when the furnace isn’t on, it tells the blower not to operate (and send cold air into your home) and when the furnace is on, it tells the blower to turn on and start circulating the warm air.

While the primary function of the limit switch is to turn the blower fan on and off, it also has a safety role. When the temperature in the air supply plenum gets too hot, the limit switch turns off the furnace boiler to keep there from being any damage from overheating. This is handy if there is a blockage in the air vents or the controls are messed up due to water damage or improper adjustments to the settings.

Looking for Problems

Most of the time, when there is an issue with your furnace turning off or on frequently, the limit switch is one of the first things you will check. Because the switch is electronic and is attached to a thermostat which measures temperature in the air supply plenum, a small problem can result in it not working properly. So, you can easily check it by temporarily bypassing the switch and seeing if your device turns on or off properly.

In many cases, if the limit switch is the problem, you will still need to call a Woodbridge professional for replacement, but you can avoid a lot of headaches related to tracking down the source of the problem. If you suspect a limit switch problem, make sure to call someone immediately, because it does provide an important safety function and because without it your furnace won’t cycle on and off properly.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Woodbridge Heating Guide: Furnace Fan Limit Switch

High Efficiency Northwood Furnaces: Chimney Concerns

Wednesday, January 11th, 2012

When upgrading to a high efficiency gas furnace in Northwood, you may need to make some upgrades to your chimney. Older chimneys built for standard furnaces with normal exhaust needs are not built to the specifications needed by today’s high efficiency models. Not only is it unsafe to leave it as is, but the cost of repairs if you don’t have it upgraded can be substantial.

Down-Sizing

A common concern when upgrading to a high efficiency gas furnace is the issue of condensation and draft. Because the amount of exhaust being vented is reduced by a high efficiency furnace, your current setup is not sufficient for the new model. So, it needs to be reduced in size by a professional to avoid backup of exhaust. Proper chimney sizing is a complex process that requires professional guidelines and careful measurements of all appliances in your home.

Because the chimney often isn’t used at all for a high efficiency furnace (often PVC pipe used instead), the extra airflow in the chimney can become a major issue.

Chimney Condensation

The biggest concern for the chimney when changing the furnace efficiency is condensation. Specifically, acidic condensation droplets can build up in the chimney if not properly stopped. A new chimney liner must be placed in the chimney to avoid excessive corrosion due to the acid droplets. Keep in mind that the efficiency of your new furnace will determine whether you will use the traditional chimney for exhaust or if a new line will be installed to vent your furnace.

When to Take Action

If you have your furnace replaced, your Northwood technician will likely discuss the chimney situation in your home with you. Keep in mind that this might be necessary and that there might be an added cost involved because of it. Modern furnaces are not designed to accommodate aging chimneys and your safety and the integrity of your house are at risk if you don’t retrofit the chimney if necessary.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on High Efficiency Northwood Furnaces: Chimney Concerns

Furnace Tip 1: How to Fix a Faulty Furnace Blower

Monday, January 9th, 2012

The blower fan on your furnace is designed to distribute warm air through the ductwork in your Talega home evenly, ensuring you use all of the energy consumed by your furnace. If the blower doesn’t turn on when the furnace turns on or it continues to run when the furnace is off, it can cost you money and result in cold rooms. Here are some tips on how to fix a faulty furnace blower.

What is the Problem?

First, check to see what the problem is. If your furnace blower remains on all of the time, it may be a thermostat issue. Make sure the fan isn’t set to stay on continuously (a common setting for most air handlers). You should also check the limit control switch to make sure it is working properly. If this is broken, it needs to be replaced which is a relatively simple fix.

If the furnace blower isn’t turning on at all, you may have a belt problem. This can be fixed by you if you have the proper tools. To repair the belt problem, first turn off all electricity to the device. You’ll need to remove the old furnace blower belt, so release the tension in the pulleys before removing the belt.

Installing a new belt is not unlike doing so for your car. Make sure to check the blower or your user manual for proper tension when you install the new belt. Make sure you purchase the right size belt and set it to the right tension. If you cannot or you do not feel comfortable doing so, you should call a professional to inspect and repair the problem for you.

Getting the Blower Back Up and Running

Once your new belt is in place, test the system carefully, starting with the lowest setting (if there are variable settings). If it does not yet work or if something sounds strange, call a Talega heating and air conditioning technician right away. You don’t want the motor to burn out or something else more substantial to go wrong with your furnace or air handler during the middle of the winter.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Furnace Tip 1: How to Fix a Faulty Furnace Blower

Troubleshooting Thermostat Issues: Is it the Thermostat or Something Else?

Friday, January 6th, 2012

If your room temperature is too hot or cold, what is the first thing you check? Probably the thermostat. If you are a San Clemente homeowner, you probably have played around with the setting on a thermostat, much to the chagrin of other occupants who don’t share your same comfort level. And if you try and adjust a thermostat at work – well forget about it. Most companies now have locking thermostats or “false” ones that don’t actually connect to the heating and cooling system.

So if you have a temperature problem, is it really the thermostat that causes it? Maybe yes and maybe no. One physical characteristic to check is the location of the thermostat. If it is in a drafty hallway or near a heat source, it only reads the temperature for that area and other parts of the building are neglected. You will often find more than one thermostat in a home that is tied into more than one furnace or air conditioner.

The older more popular round thermostats are manually controlled and do not adjust to any conditions in your San Clemente home. They simply control the heating and cooling functions based on a human turning a dial. It’s as simple as that. So if you use this method to adjust the temperatures, blame yourself and not the thermostat. You might want to consider installing a digital, programmable thermostat.

With that in mind, let’s look at some typical ways to troubleshoot a thermostat.

  • Check the anticipator, which is a small metal tab on the front of the printed scale. Give it a light push in either direction. It may be stuck.
  • Clean the interior of the thermostat housing and clean the contacts (small metal plates)
  • Check loose wires or wires that may be corroded.
  • Read the thermostat manual (if not available, look online) for other tips such as ensuring there is voltage to the terminals.

If you have checked everything and the thermostat seems to be in working order, look for other things within the heating & cooling system. These include blocked or restricted registers and vents, leaks or cracks in ductwork, and dirty air handling filters.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Troubleshooting Thermostat Issues: Is it the Thermostat or Something Else?

Heating Maintenance Tip 1 : Did You Change that Furnace Filter?

Wednesday, January 4th, 2012

No matter what type of furnace you have in Silverado, it’s important to remember to change or clean the filter on a regular basis. This is a relatively straightforward process and doesn’t require a Silverado professional‘s help. However, if you’re not sure how to go about doing it, you can always have your heating technician demonstrate the process for you on their next regular maintenance visit.

Indeed, changing or cleaning out the furnace filter is an important part of regular furnace maintenance. However, it often needs to be done more than once a year. The specific amount of time that you can go between filter changes depends on many things, but typically it’s good to check on it once every three months or so.

If you have a lot of pets or if anyone in your family has severe allergies, it may be worth it to check and change the filter even more often. Check with the manufacturer to see what their recommendations are as well. Some high performance furnace filters can last up to six months or even a year, but you should still check on the filter periodically to make sure that too much hasn’t built up on it in between replacements or cleanings.

You’ll need to make sure you have the right type of filter to install as a replacement as well. You can get this information from the owner’s manual of your furnace, from the manufacturer or by taking out and examining the current filter in your furnace. Some furnaces also have filters that are meant to be cleaned and then put back in and the cleaning instructions are usually located near the filter itself.

Of course, in order to change your filter you’ll first have to be able to find it. Most of the time, the filter will be located near the blower towards the bottom of the furnace. However, if you’re not having much luck finding it, your owner’s manual should be able to tell you quickly where it is and how to remove it. Before you go to open the chamber and take the filter out, however, be sure you’ve turned off the power to the furnace.

Changing your furnace filter can help improve the air quality in your Silverado home and it is also very important when it comes to keeping your furnace running efficiently and effectively. The filters are there to trap airborne particles that can get into the blower and clog it up. When that happens, the performance of your furnace will likely drop and you’ll need to have a Silverado professional come out and complete the necessary repairs.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on Heating Maintenance Tip 1 : Did You Change that Furnace Filter?

Common Garden Grove Furnace Problems

Monday, January 2nd, 2012

When it comes to your home Garden Grove furnace, you simply want it to work all of the time. But just like any other piece of equipment, your furnace will have problems from time to time. A few of these are relatively simple to fix on your own, but for the most part you’ll need to call in someone to take care of the repairs for you.

However, before you can do that, you’ll need to recognize that a problem exists at all. And the earlier you notice the warning signs, the better off you’ll be. It’s always better to get a furnace problem taken care of right away than to wait until your furnace stops working completely.

It’s also good to remember that quite often the problems you’re having with your furnace are really originating with your thermostat. This is usually welcome news, as thermostats are much cheaper and easier to repair and replace than many other parts of your furnace. In fact, even if your furnace isn’t working at all, it may only be the result of a faulty thermostat.

Another problem you may start to notice is that one part of your Garden Grove house is being warmed more than another part. When this happens, it can be a sign that there is something wrong with the furnace, but it may also be that the pressure in your duct system is not balanced properly. A simple rebalancing of this system can have your house heating evenly again in no time.

You may also realize that your furnace seems to be cycling on and off too often. When a furnace is working properly, it will come on for a considerable period of time and then shut off until the temperature in the house drops below the desired level. However, some problems can cause your furnace to complete many short cycles rather than fewer short ones.

If this is happening to your furnace, there are several possible causes. Something might be wrong with the blower on the furnace or the thermostat might not be feeding the furnace the correct information. Another possibility is that your furnace’s air filter is dirty or clogged.

While there are sometimes simple and straightforward solutions to these types of common furnace problems, it’s best to call in a Garden Grove professional to have them take a look if you’re not sure where to start searching for a problem. In most cases you’ll need them to come out and make the necessary repairs anyway.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Common Garden Grove Furnace Problems

Happy New Year’s Eve from Your Orange County Plumbing and HVAC Contractor!

Saturday, December 31st, 2011

Happy New Year’s Eve! Have a great time welcoming the New Year tonight! We hope that you are able to achieve all of your resolutions for this upcoming year. Fun fact: the ancient Babylonians were the first to establish the tradition of New Year’s resolutions. That means that people have used this time of year to set goals for themselves for thousands of years!  If one of your resolutions is to be more environmentally friendly, remember that an upgrade to your HVAC system can make a big difference in your house’s energy efficiency!

Continue Reading

Tags:
Posted in Services | Comments Off on Happy New Year’s Eve from Your Orange County Plumbing and HVAC Contractor!