Saddleback Plumbing Heating & Air Blog: Posts Tagged ‘Buena Park’

How to Make Your Santa Ana Heating System More Effective

Wednesday, December 7th, 2011

Everyone wants an effective heating system in Santa Ana– one that will provide steady, reliable heat without you having to spend hundreds of dollars each month on gas, oil or electricity. And while the best way to improve the efficiency of your heating system in most cases is to upgrade it, there are some simple things you can do around the house to boost its effectiveness. Here are some of the best:

  • Rearrange Furniture – Just having the heat on doesn’t necessarily ensure the heat entering your room is being distributed evenly. Move your furniture in such a way that there is a clear, unimpeded path from the registers and radiators to the rest of the room. Done properly, this will make it much easier to and faster to heat every room of your house.
  • Maximize Air Flow – Air flow can be maximized in a number of ways. Make sure you close any windows near a register or radiator and that you remove any large objects that might block air flow. You should also install things that can help move air like fans and always call someone in for changes to the arrangement of your vents or radiators.
  • Clean Registers or Radiators – The cleaner your radiators or dust registers are, the more efficiently they release their heat. Not only have that, but clean radiators and registers resulted in better indoor air quality. Weekly cleaning of each room’s heating source is highly recommended.
  • Install Ceiling Fans – Ceiling fans switched to blow down are incredibly effective for distributing air throughout the room. This will keep push warm air down and keeps cold air up – in effect, reducing the need for constant running of your furnace.

Effective heating is important to keep your home comfortable, reduce the cost of heating and prolong the lifespan of your furnace . You should also make sure your heating system is properly maintained throughout the year. Skipping maintenance visits (which are highly recommended annually) will put unnecessary stress on your system and shorten its lifespan substantially, not to mention the decrease in efficiency when heating your home.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on How to Make Your Santa Ana Heating System More Effective

Tips From Saddleback Plumbing About Upgrading Your Central Air Conditioner

Monday, August 8th, 2011

When the time comes to upgrade your central air conditioner, whether you live in Buena Park or anywhere else, you will have a lot of things to take into account. If you were generally satisfied with the performance of your old system, it can be very tempting to stick with a similar model. But if you do not examine all of the options out there right now, you may very well be missing out on a great deal.

If you already have a central air conditioner in place, chances are that you also have ductwork throughout your house. In that case, you will probably be better off with a packaged air conditioner as opposed to a split system. If it is a split system you are replacing, however, you should probably keep your search limited to other split systems. Installing a packaged air conditioner when you do not already have ducts in place can dramatically increase the overall cost of the project.

You will also want to make sure that the system you choose is compatible with the heating system and air handler that you already have in place. Most central air conditioning systems can be integrated easily with all types of heating systems, but you should still check to make sure this will not be a problem, particularly if you have an older heating system.

In terms of picking out the right new system for your home, energy efficiency is probably the main factor to consider. While just about every air conditioner on the market right now will be much more efficient than the unit you are replacing, you want to make sure you get a model that will provide you with the optimal savings in the long run.

This does not necessarily mean that you should go out and buy the most energy efficient air conditioner out there. In fact, because the more energy efficient units are also typically more expensive, you may not actually save money by going that route. But you will do well to choose a unit that will save you enough monthly to offset the installation costs and for most people, that means that you will want an air conditioner that is either a SEER 14 or SEER 16.

Of course, the actual amount of money you will save as you move up through the SEER rankings depends on how much you use your air conditioner to begin with. If you live somewhere with very hot weather and you use your unit for a large chunk of the year, it may very well be worth it for you to opt for a very high efficiency model.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Tips From Saddleback Plumbing About Upgrading Your Central Air Conditioner

Shower Valves and Fittings

Friday, July 8th, 2011

Your shower is the place you go to get clean. But it is also much more than that. You want to be able to enjoy a comfortable showering experience at all times, and for that you need to have the right shower valves and fittings. There are a lot of factors to consider when you are picking out your new shower setup, so it is a good idea to do some research ahead of time to find out what features are really important to you and which you can do without.

First of all, you will need to pick out the type of shower head that you want. There are wall-mounted, ceiling-mounted and hand-held varieties available, so you should think about where you like the water to be coming from and how much flexibility you want to have in that. Some people definitely prefer hand-held shower heads, but for others it is simply a wasted feature.

When you go to buy a shower head, it is also important to have a budget range firmly in your mind. There are so many features available on some of the top of the line models that it can be very tempting to go all out. Be sure that you really consider how likely you are to make use of all of those features before you go and spend the money on them.

The number of controls that your shower has is another item that you will have to consider. The types of controls you need will depend to a certain extent on the water pressure situation in your house and the availability of hot and cold water. For instance, if your shower is susceptible to losing cold or hot water when someone turns it on elsewhere, you will want a shower head that can compensate for that. If that is not an issue for you, however, there is no reason to spend the money for that particular feature.

While you certainly have many feature-based decisions to make when it comes to picking out your new shower valves and fixtures, do not forget to consider aesthetics as well. The look of your new shower matters too and there are so many different fixture styles and finishes that you should have no problem finding one that suits your sense of style.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Shower Valves and Fittings

Can I Choose Environmentally Friendly Coolants?

Wednesday, April 20th, 2011

Air conditioners are indispensable in many parts of the country, but their environmental impact has long been a source of controversy. In particular, the coolants that were used in the earliest air conditioners, chlorofluorocarbons (CFCs) have done quite a bit of damage to the Earth’s protective ozone layer.

When this affect was discovered, countries all over the world acted to have them phased out of production and use in air conditioning. While CFCs have not been produced since 1995, there are still many air conditioning units functioning today that use CFCs. As these units wear out, of course, the CFCs will gradually disappear from use altogether.

Another type of coolant that is commonly used in air conditioners is hydrochlorofluorocarbons (HCFCs). These have a slightly lower environmental impact than their cousin CFCs, but they are still not ideal in terms of preserving the ozone layer and impeding the progress of global warming. HCFCs are gradually being phased out as well, and they will no longer be produced at all by 2030.

However, it is still possible to buy air conditioners that use HCFCs as a coolant, and if you can avoid this, you should. HCFCs are not nearly as environmentally friendly as some of the other options on the market, and if you are concerned about the effect that these types of chemicals can have on our environment, it is best to steer clear of air conditioners that use HCFCs.

So what coolants are considered environmentally friendly? Well, there are actually two options in this regard. The first are hydroflourocarbons (HFCs). Although they are quite similar to CFCs and HCFCs, HFCs do not contain chlorine and so do not do the type of damage that their predecessors were capable of. You can find air conditioners that use HFCs relatively easily by looking for an “ozone friendly” label on the box.

Refrigerant blends are also becoming a more and more popular environmentally friendly coolant solution for air conditioners as well. Although these types of coolants typically cost more to produce and so can drive up the cost of the air conditioners that use them, they should begin to come down in price as they are more widely adopted across the industry. Just as with HFCs, look for the “ozone friendly” label to identify air conditioners that use refrigerant blends as coolants.

Continue Reading

Tags:
Posted in Services | Comments Off on Can I Choose Environmentally Friendly Coolants?

Shower Installation: Prefabricated vs. Tile

Monday, April 11th, 2011

There are quite a few things to consider when you are choosing a type of shower installation. Whether you are simply redoing an older shower or are having a new one completely installed, you will have to decide whether you want to go with a prefabricated installation or a more traditional tile interior. Both of these types of installations have their own sets of advantages and disadvantages, so determining which one is right for you will have a good deal to do with the particulars of your situation.

Prefab installations are generally made out of fiberglass or acrylic, making them lighter and less expensive than the tile alternatives. This is always great if you are on a budget, and it can benefit you in other ways as well. For instance, if you are trying to install a shower in an area without substantial floor support, a prefab installation is ideal because the shower stall simply does not weigh that much.

But prefab shower installations also have their drawbacks. They are not as versatile, particularly the one-piece installations, and they are only available in a set number of sizes and styles. And while you can touch them up to a certain extent when cracks develop, the likelihood is higher that you will have to replace a prefab unit sooner than you would a tiled one.

Tiled shower installations are certainly more labor intensive to design and install. And this, of course, means that they cost more overall. But they also offer you a much wider range of design and installations possibilities. They can be made to fit any space and are especially convenient when you are remodeling your home because the materials used can easily be carried through spaces large and small.

If you are looking for a do-it-yourself project, however, a tile shower installation may not be for you. While it is possible to complete this type of project on your own, there are a lot of factors you will have to take into account. Also, the work takes much longer than a prefab installation would. The end result may be much more pleasing, but you will definitely have to work for it.

And even if you have professionals install your tile shower, it will take more than the one day the prefab installations usually take. So before you set your shower installation choice in stone, take some time to carefully consider the pros and cons of each.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Shower Installation: Prefabricated vs. Tile

Water-Saving Tips and Tricks

Wednesday, February 2nd, 2011

Here are some of our favorite water-saving tips. They are easy to incorporate into your lifestyle – and can save you hundreds or even thousands of gallons of water a year.

Whole House

  • Check for leaks – you may save thousands of gallons a month! You can find leaks by looking, listening, and monitoring your water bill for unusually high usage. To check for toilet leaks, put food coloring in your tank. If it gets into the bowl without flushing, you have a leak. Don’t forget to look for leaks in your outdoor plumbing too.
  • Know where your master water shut-off valve is located. In the event of a major problem, you’ll save thousands of gallons of water – and maybe your possessions as well.

Outdoors

  • Adjust your sprinklers so that you water only your lawn – not your sidewalk or driveway.
  • Consider adding a patio or “outdoor room” to your home. You’ll have less lawn to water and will add thousands of dollars to your home’s value.
  • Do two chores at once – water the grass by washing your car or your pet on the lawn. Be sure to use natural, biodegradable soaps.
  • Have your plumber re-route your laundry waste water to your lawn (check with local authorities first to be sure this is legal in your town).

In the Bathroom

  • Turn off faucets when you’re not actively using water – such as when you’re lathering your hands, shaving, or brushing your teeth. You’ll save hundreds of gallons each month. New touchless water faucets (or very affordable converters for your existing faucet) make this easy and fun to do, especially for kids.
  • Shorten your shower by only a minute or two, and save 150 gallons of water a month. (You can do this by turning off the shower while you lather your hair.)
  • Replace your old showerhead with a new WaterSense water-saving showerhead. They’re inexpensive and easy to install. You’ll save up to 750 gallons a month (and it’s a great opportunity to get a nice style upgrade too!).
  • Install WaterSense-certified aerators on all your faucets – another inexpensive upgrade that can save hundreds of gallons a month.
  • Insulate hot water pipes so don’t have to run the water as long while you wait for it to heat up.
  • Plug the tub before turning the water on for your bath, then adjust the temperature as the tub fills up.
  • Keep a bucket in the shower to catch water as it heats up. Use this water to flush toilets or water plants.

In the Kitchen and Laundry Room

  • Install a tankless water heater near your kitchen sink so you don’t have to run the water while it warms up.
  • If your dishwasher is new, scrape off excess food, but don’t pre-rinse. Modern dishwashers are built to handle un-rinsed items.
  • Upgrade your old water-cooled refrigerator, air conditioner, or ice-maker to a new air-cooled model for a significant reduction in water use
  • When buying new appliances, look for the EnergyStar label, which guarantees high efficiency. Also, look for models that offer cycle and load size adjustments.
  • Run your dishwasher and clothes washer only when they are full – you can save up to 1,000 gallons a month.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Water-Saving Tips and Tricks