Saddleback Plumbing Heating & Air Blog: Posts Tagged ‘Costa Mesa’

Plumbing FAQ 4: Why Won’t My Heat Pump Start?

Monday, January 30th, 2012

Plumbing experts in Irvine advise home owners that if you are having trouble with your heat pump, you may be surprised to learn that it is probably not the heat pump that is to blame, especially if the trouble is that it simply won’t start up. That seems counterintuitive, but it’s true: the heat pump can be in perfect working order but still not turn on.

The good news, then, is that your heat pump is fine and you won’t have to pay an arm and a leg to fix or replace it. Still though, these types of problems can very frustrating to diagnose and correct. Here are four common culprits when a heat pump won’t start:

  1. No power to the heat pump. Check your breaker box to see if the circuit breaker was tripped. If so, reset it and see if that fixes the problem. Another possibility is that your heat pump is wired to a wall switch, or that there is a switch on the unit itself. Make sure the switch is turned on.
  2. Make sure the thermostat is set to the proper mode, such as “heat” mode if you desire more heat. It seems overly simple, but sometimes the trouble is as simple as that.
  3. A recently replaced thermostat. If you recently upgraded or replaced the thermostat in your home, it’s possible that something went wrong that is preventing your heat pump from starting. It may be the wrong kind of thermostat – heat pumps require a specific type – or it may have been improperly wired.
  4. Finally, the heat pump may have its own circuit breaker on the air handler cabinet. This is often the case with heat pumps that have supplemental electric elements. If that breaker is tripped, that could cause the problems you are experiencing.

If you exhaust these problems and the problem persists or recurs – for example, if the circuit breaker trips again – call a contractor to work on your heat pump. There may be something larger at work that is causing problems in the electrical system that controls your heat pump, and that requires some expertise to properly address.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on Plumbing FAQ 4: Why Won’t My Heat Pump Start?

Troubleshooting Thermostat Issues: Is it the Thermostat or Something Else?

Friday, January 6th, 2012

If your room temperature is too hot or cold, what is the first thing you check? Probably the thermostat. If you are a San Clemente homeowner, you probably have played around with the setting on a thermostat, much to the chagrin of other occupants who don’t share your same comfort level. And if you try and adjust a thermostat at work – well forget about it. Most companies now have locking thermostats or “false” ones that don’t actually connect to the heating and cooling system.

So if you have a temperature problem, is it really the thermostat that causes it? Maybe yes and maybe no. One physical characteristic to check is the location of the thermostat. If it is in a drafty hallway or near a heat source, it only reads the temperature for that area and other parts of the building are neglected. You will often find more than one thermostat in a home that is tied into more than one furnace or air conditioner.

The older more popular round thermostats are manually controlled and do not adjust to any conditions in your San Clemente home. They simply control the heating and cooling functions based on a human turning a dial. It’s as simple as that. So if you use this method to adjust the temperatures, blame yourself and not the thermostat. You might want to consider installing a digital, programmable thermostat.

With that in mind, let’s look at some typical ways to troubleshoot a thermostat.

  • Check the anticipator, which is a small metal tab on the front of the printed scale. Give it a light push in either direction. It may be stuck.
  • Clean the interior of the thermostat housing and clean the contacts (small metal plates)
  • Check loose wires or wires that may be corroded.
  • Read the thermostat manual (if not available, look online) for other tips such as ensuring there is voltage to the terminals.

If you have checked everything and the thermostat seems to be in working order, look for other things within the heating & cooling system. These include blocked or restricted registers and vents, leaks or cracks in ductwork, and dirty air handling filters.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Troubleshooting Thermostat Issues: Is it the Thermostat or Something Else?

Detecting Leaks with Your Water Meter in Costa Mesa

Monday, October 10th, 2011

When you notice a leak in your Costa Mesa home’s plumbing, you fix it right away, but what happens when you don’t notice a leak for days or even weeks? The damage it causes can have a profound impact on your water bill and the good repair of your home. To avoid hidden leaks – the ones that hide in your walls or your yard, keep a close eye on your water meter.

The Hidden Leaks

Obvious leaks are…well, they’re obvious. They pour water down the walls, leave puddles in your bathroom or create ponds in your backyard. Unfortunately, the majority of leaks are much less obvious. They result from small drips between pipe joints in your walls or a hairline fracture in your water main or drain pipes. They may not even appear where you can see them.

If this happens, it’s important to have a keen eye for the signs that a water leak has occurred. Specifically, look for jumps in your water meter readings.

Watching the Water Meter

Your water meter tracks every drop of water consumed by your family. To check for water loss, record the reading at the same time every day and watch how it changes. To be sure of a leak, you can turn off all the fixtures in your home and watch for the meter to move. If the meter moves despite the fact that no one in your home is consuming any water, it is likely a leak.

You can also compare your bills from one month to the next. If your bill rises suddenly, without any clear reason, check the meter readings and the rates. If the meter reading increased suddenly and the water rate did not, there might be a leak to blame. If that’s the case, call a professional to inspect your water lines immediately – what is hidden to you might be a relatively obvious, straightforward repair to someone else.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Detecting Leaks with Your Water Meter in Costa Mesa