Saddleback Plumbing Heating & Air Blog: Posts Tagged ‘Garden Grove’

Pipe Inspection Camera: When to Use One

Friday, June 10th, 2011

For plumbers today, pipe inspection cameras are a huge aide. In the past, it was often very difficult to determine the location of a blockage or a leak, or indeed if one even existed at all. But now with this great modern equipment, it is much easier to get a thorough picture of the exact state of a pipe system and the nature of a potential problem.

These types of inspection cameras are especially useful when a clog is located underground or when an underground leak is suspected. Many types of plumbing problems can have multiple possible causes. But with pipeline inspection cameras, you can know for sure quickly exactly what type of problem you are dealing with.

For instance, even if you know that an underground pipe is leaking, it can be next to impossible to figure out exactly where the leak is. But to fix the leak you will have to unearth the damaged section of pipe and repair it. If you cannot pinpoint the leak precisely, you will be forced to unearth a large section of pipe. This takes a long time and causes unnecessary, although hopefully temporary damage to your yard as well.

However, if you can determine exactly where the leak is, you can dig up only the affected portion of pipe. This saves a lot of time and labor and it also means that you can limit the disruption the work causes in your yard. And the best way to find a leak like this is to use a pipe inspection camera to get a look at the inside of the pipe before you ever begin digging.

You do not need to wait for an emergency situation to develop to make use of a pipe inspection camera either. This technology is also extremely useful during annual drainage and sewer maintenance visits to help ensure that there are no unnoticed problems lurking below the surface. It is perfectly possible that one of your pipes is getting close to cracking but has not done so yet. The repairs can be a lot simpler if you catch this type of problem early, and that is exactly what a pipe inspection camera makes possible.

Pipe inspection cameras are also useful during maintenance visits because they allow technicians to determine which parts of your system need the most work. They can see where the larger buildups are and get the job done quicker overall than they could if they were operating blind.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Pipe Inspection Camera: When to Use One

Turn that Thermostat Down a Degree and Save Money

Friday, April 1st, 2011

There are literally dozens of things you can do to cut back on your heating (and cooling) costs. These range from things like getting a high energy efficiency system to just making sure that you have adequate insulation in all parts of your house. But too many people overlook one of the simplest things that you can do to cut down on your monthly heating bill, and that is to turn the thermostat down.

Of course, you did not pay for that high tech home comfort system just so that you could walk around cold all winter long. You certainly want to keep your house at a temperature that is comfortable, but what does that really mean?

The normal default setting for a home heating system is usually somewhere between 72°F and 75°F. If you have your thermostat set somewhere in this range in the winter, you are probably quite comfortable indoors. In fact, you might not even need a sweater. But would you really notice if it was a degree or two cooler? Would it be incredibly inconvenient to put on a sweater or sweatshirt after all?

The truth is that most of us will be just as comfortable at 69°F as we are at 72°F, and the effect that small adjustment can have on your heating bill is actually pretty significant. In fact, you will save an average of 3% on your monthly bill for every degree you turn your thermostat down. Drop the temperature down by three or four degrees and that will give you up to a 10% monthly savings – hardly something to turn up your nose at.

And setting the regular temperature in your house a bit lower is not the only way your thermostat settings can save you money. You will also save quite a bit if you take the time to turn down the temperature when you leave the house and when you go to bed at night. There simply is no reason to pay to heat your house when you are not there and you will certainly be rewarded with a lower energy bill for your efforts.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Turn that Thermostat Down a Degree and Save Money

How a Water Softener Works

Wednesday, March 9th, 2011

You use water for many things. It is necessary for bathing, cooking, washing clothes and for drinking. But the water we use in our homes is not pure. It has plenty of other minerals and additives suspended inside. While some of these, like fluoride, are intentionally added to the water supplies in certain areas, some others get in by chance.

Aside from actual pollutants, the additives you may be the most concerned about finding in your water are calcium and magnesium. These minerals are picked up by water as it moves through the ground, and the more of them that get into your home water supply, the harder that water will be.

The term hard water is used to describe water with high levels of calcium and magnesium present. These minerals are not actually dangerous to us, but they can cause all sorts of problems for your indoor plumbing and other household systems. For instance, hard water will leave deposits of these minerals on the insides of pipes and on sinks, faucets and bathtubs.

Residue will also build up in appliances like coffee makers, dish washers and washing machines. Over time these buildups can become a real problem and you may have to pay for costly repairs or need to replace large appliances.

In order to avoid these types of complications, your best bet is to have a water softener installed. These systems can be connected directly to your home water source and they are able to remove excess calcium and magnesium from the water before it ever reaches any of your indoor plumbing or appliances.

Water softeners generally remove these minerals by attracting the positively charged calcium and magnesium particles with a tank full of negatively charged polystyrene particles. In this system, the calcium and magnesium are replaced by sodium ions as they move through the water softener, thereby maintaining the overall balanced composition of the water. Once the water has passed through and the calcium and magnesium have been left behind, the water softener will flush them out and prepare to absorb another wave of hard water minerals.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on How a Water Softener Works

Why Does My Garbage Disposal Leak, Grind Poorly and Make a Lot of Noise?

Monday, February 7th, 2011

It is definitely convenient to have a garbage disposal in your kitchen. They make doing the dishes and getting rid of food waste much easier. But just like any other appliance or piece of equipment in your home, your garbage disposal can sometimes develop a problem that causes it to leak or perform inadequately.

Leaky garbage disposals are certainly no fun to deal with. There are several reasons why garbage disposals can develop a leak. There could be an inadequate amount of putty or sealant at the joint where the garbage disposal connects to the drain pipe from the sink. A leak can also spring from that area simply because the bolts holding the two pieces together are not securely tightened.
The point where food and waste exit the garbage disposal and move into the main drainage system is another spot prone to developing leaks. These types of leaks are similar to those that occur between sink drain and garbage disposal and can be remedied in the same way.

In general, the key to dealing with a garbage disposal leak is to locate the source. This will most often be where two pipes come together or where the pipes join the unit. However, as your garbage disposal ages, it is more prone to developing cracks in the body of the unit itself. When this happens, leaks can develop anywhere there is a seam or break in the body of the garbage disposal itself. With this type of leak, the only thing to do is to replace the garbage disposal with a new one.

Leaks are not the only problems that can develop in a garbage disposal either. Sometimes you may notice that your garbage disposal is making an unusual amount of noise when it is turned on. This is often the result of something getting in there that should not have, so you should not continue to run your garbage disposal. Turn off all power to the unit and see if you can reach or see into the garbage disposal to determine what is causing the problem.

If your garbage disposal is not grinding well even though it seems to be rotating fine, you may not be running enough water into it when it is turned on. The water is necessary to facilitate the grinding process, so be sure to keep it going at all times. If that does not solve the problem, you may need to have a professional come out and take a look at your system to find out what is going on.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Why Does My Garbage Disposal Leak, Grind Poorly and Make a Lot of Noise?

WaterSense Labels

Friday, February 4th, 2011

Many people know about the EPA’s EnergyStar certification, which is a third-party certification system that verifies manufacturers’ claims about the energy efficiency of home appliances. The EnergyStar label has helped hundreds of thousands of consumers choose high-efficiency, cost-effective appliances for their homes.

The EPA has also developed a certification for plumbing fixtures, called WaterSense. WaterSense labels can be found on a variety of products, including:

  • Bathroom sink faucets and accessories
  • Showerheads
  • Toilets

While there are specific guidelines for each category of plumbing fixture, in general, the WaterSense label indicates that the product is at least 20% more efficient than conventional products in its category, without sacrificing performance or comfort.

The goal of the WaterSense guidelines is to make a real difference in the amount of water consumed in the U.S. – and the numbers bear this out. Let’s take a look at what would happen if every household in the US installed WaterSense products in their bathrooms.

If every household in the U.S. installed WaterSense bathroom sink faucets, it would save 60 billion gallons of water and $600 million in water heating costs. If every U.S. household put in WaterSense showerheads, the US would use 250 fewer billion gallons of water annually and save $2.5 billion in water heating costs. And if every household in the US upgraded to a new, efficient WaterSense toilet, it would save 640 billion gallons of water a year.

More realistically, even if only 1 in 10 U.S. households upgraded to WaterSense products, we would save about 74 billion gallons of water a year and $1.5 billion on our water heating bills.

Like EPA EnergyStar products, WaterSense products can be found at most plumbing retailers.

The WaterSense label can also be applied to entire homes. Homes that have the WaterSense label have:

  • Efficient hot water systems that deliver hot water quickly to minimize waste and waiting
  • WaterSense plumbing fixtures
  • EnergyStar dishwashers and clothes washers
  • Regionally appropriate outdoor landscaping that requires minimal maintenance and watering

In addition, landscaping professionals can apply for WaterSense certification to show that they have training in water-efficient irrigation system design, installation, maintenance, and auditing.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on WaterSense Labels