Saddleback Plumbing Heating & Air Blog: Posts Tagged ‘Irvine’

Plumbing Tip : Common Causes of Plumbing Noises

Monday, July 2nd, 2012

With something as important as your Irvine plumbing system, you want to be sure that everything is working correctly and effectively. Many people, though, will ignore the signs that something is wrong as long as the water flows when it is supposed to. Not only are noises from your plumbing annoying, they are also indicators that there is a problem somewhere in your system. Here are some common noises and the fixes that may be needed to keep your plumbing quiet.

Gurgling Sounds from Drains

This is such a common problem that people may not even consider it one. If your drains are gurgling or making sucking sounds chances are that there is some kind of blockage in the drainpipe. The obstruction is forcing the water to squeeze past it, resulting in the gurgle. Hire an Irvine plumber to snake out your drain. You’ll be surprised at how quiet draining your sink or tub can be.

Screeching or Squeaking Sounds

More often than not this sort of noise is the result of rusty or ill-fitting parts. If you have an irregular washer, for instance, it can restrict the flow of water through the pipe, and the force of the water pushing past the washer can result in the screech. Call in a plumber to pinpoint the location of the problem; often all it will take to repair is replacing a part.

Banging Sounds

If your pipes are banging when you have the water on, chances are that it is in fact an external problem. If your pipe connections are loose or improperly secured then your pipes have enough room to move around. The banging is the result of their hitting fixtures. Have a plumber inspect your system while turning the water on and off. All that may be required after locating the source of the banging is the tightening of some fixtures.

Water Hammering

Water hammering is the term for the banging in your water pipes when you turn the water off, not on. It is the result of an abrupt stop in the flow of the water in your pipes, like when you quickly turn off the water. Pressure builds behind the remaining water in the pipes and causes the hammering. If enough pressure builds, this situation can easily become a more serious problem. Call a plumber if you are experiencing water hammering.

These are just a few of the problems that are indicated by noise in your plumbing system. There are many other possible issues, and some can be quite serious. Call Saddleback Plumbing, Heating & Air Conditioning today if you have any concerns with your Irvine plumbing.

Continue Reading

Tags: , , , , , ,
Posted in Plumbing | Comments Off on Plumbing Tip : Common Causes of Plumbing Noises

Heat Pump Air Duct Requirements

Monday, April 9th, 2012

The concerns about climate change and the rising costs of energy production has inspired a lot of experimentation with new technologies in Orange County heat pumps.  Standard choices are being re-evaluated and new designs are changing the requirements for various parts.

In homes and other buildings where heating systems were designed and installed according to the cheaper energy parameters prevalent in the day, it may be time to consider drastic changes to increase the efficiency and decrease impact on the carbon footprint.  Room for improvement can be found in many corners.

Heat Pump Technology

Among the systems getting a fresh look are heat pumps, a device that transfers thermal energy from one location to another, usually in the direction of from a colder temperature to higher and generally the opposite of the natural flow.  While compressor-driven air conditioners and freezers are technically heat pumps, “heat pump is the term that usually implies one of the less-common devices in the class that are not dedicated to refrigeration-only.

A heat pump that maintains a thermally conditioned-space can be used to provide either heating or cooling, depending upon whether the environment is cooler or warmer than the conditioned-space.  Typically pumps utilize some thermal energy from the environment itself, such as the natural heat beneath the Earth’s surface.

By simply transferring the energy rather than producing it, heat pumps are being more seriously considered as attractive alternatives to provide an efficient and clean system for conditioning public and living spaces.

Change of Use

In considering a change from an existing system to a heat pump, there are many details to compare to see if it makes any sense at all.  The overall local climate (cool or hot) in general, and the availability of geothermal heat, in particular,  are two major factors.

Since a heat pump typically moves conditioned air through ductwork, the advantages of the change are much more realistic with a system of pre-existing ducts such as a forced air furnace or central air-conditioning unit.  While a heat pump often requires a larger volume of ducts, the old network of metal tunnels was often over-sized for inefficient furnaces and should do fine in a conversion to a heat pump.

The Right Data

Since the required formulas are dependent upon variables such as size, distance, volume and oomph, the design is strategic and makes all the difference.  Contact Saddleback Plumbing to speak with a trained and experienced professional because.

Do the homework to get the best recommendation for your home.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on Heat Pump Air Duct Requirements

Plumbing FAQ 4: Why Won’t My Heat Pump Start?

Monday, January 30th, 2012

Plumbing experts in Irvine advise home owners that if you are having trouble with your heat pump, you may be surprised to learn that it is probably not the heat pump that is to blame, especially if the trouble is that it simply won’t start up. That seems counterintuitive, but it’s true: the heat pump can be in perfect working order but still not turn on.

The good news, then, is that your heat pump is fine and you won’t have to pay an arm and a leg to fix or replace it. Still though, these types of problems can very frustrating to diagnose and correct. Here are four common culprits when a heat pump won’t start:

  1. No power to the heat pump. Check your breaker box to see if the circuit breaker was tripped. If so, reset it and see if that fixes the problem. Another possibility is that your heat pump is wired to a wall switch, or that there is a switch on the unit itself. Make sure the switch is turned on.
  2. Make sure the thermostat is set to the proper mode, such as “heat” mode if you desire more heat. It seems overly simple, but sometimes the trouble is as simple as that.
  3. A recently replaced thermostat. If you recently upgraded or replaced the thermostat in your home, it’s possible that something went wrong that is preventing your heat pump from starting. It may be the wrong kind of thermostat – heat pumps require a specific type – or it may have been improperly wired.
  4. Finally, the heat pump may have its own circuit breaker on the air handler cabinet. This is often the case with heat pumps that have supplemental electric elements. If that breaker is tripped, that could cause the problems you are experiencing.

If you exhaust these problems and the problem persists or recurs – for example, if the circuit breaker trips again – call a contractor to work on your heat pump. There may be something larger at work that is causing problems in the electrical system that controls your heat pump, and that requires some expertise to properly address.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on Plumbing FAQ 4: Why Won’t My Heat Pump Start?

What is an Electric Furnace? A Question from Foothill Ranch

Wednesday, November 23rd, 2011

There are many types of furnaces available in Foothill Ranch that use a variety of energy sources to operate. Gas furnaces use natural or propane gas, boilers and radiators use water, heated by electricity. And then there are electric furnaces, which may have an advantage over other energy sources based on energy costs.

Simply put, electric furnaces function through the use of electricity. They do not require the use of any type of fuel – but function through wires and chords. An electric furnace uses heating coils, sometimes referred to as “resistance calrods” to create heat directly in the air flow. Inside the furnace cabinet are controls, a blower, and the circuit breakers for the heating elements. Some furnaces have the breakers accessible from the outside of the cabinet.

Other add-on accessories may include an electronic air cleaner, air filter, humidifier, high performance media filter, and air conditioning evaporator coil.

The heating process begins with the home’s thermostat. A drop in temperature is sensed by the thermostat, which alerts the electric furnace. The coil then warms up, thanks to the electric current that passes through it. The heated coil in turn heats the temperature of the air around it, which is then blown into the house through a blower. The pressure that is exerted by the blower on the heated air, warms it further. The blower is able to overcome the resistance of the duct work and replace unheated, colder air with the heated air. In most homes there are various return air ducts that are used to bring in the colder air to the furnace. This cold air travels through the furnace, through an air filter, the blower, and finally through the heat exchanger. After this it will then be pushed back into the house as warm air.

To maintain a supply of fresh air in the house, some furnaces also suck air from the atmosphere outside. After the air in the house reaches a particular temperature, the thermostat automatically shuts off the electric furnace.

An electric furnace may be less costly to run, depending on the price of electricity versus other sources like natural gas, propane gas, or oil. Gas and oil are fossil fuels and burning them leaves a “carbon footprint” – the release of carbon compounds and gases into the atmosphere. An electric furnace does not burn fuel and thus does not leave a carbon footprint. This electric warming process results in fewer particulates and contaminants in the air, too.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on What is an Electric Furnace? A Question from Foothill Ranch

Happy Halloween Weekend! (and Surprising Sources of Indoor Air Pollution)

Friday, October 28th, 2011

Everyone from Saddleback wishes you a Happy Halloween Weekend! Have a spooky (but safe) time!

Our scary warning of the day is about indoor air pollution. Indoor air pollution is a major problem for millions of homeowners throughout the country each year, and some of them live in Fountain Valley. In fact, the EPA estimates upwards of 20 million households may have problems caused by mold, radon, humidity, exhaust or any number of other pollutant problems. However, not all of the indoor air pollutants out there are so obvious. Some are things you probably have in your home right now and don’t realize it. Here are some of the more surprising sources of indoor air pollution and what you can do about them:

  • Incense – Incense releases both carbon monoxide and benzene, two chemicals that are potentially harmful to human health. Cancer, skin irritation and asthma risks are all increased in people who spend a lot of time around incense.
  • Laser printers – Laser printers that use toner can release a number of harmful chemicals into the air. That toner is very fine and releases particles into the air that are equal to or in some cases worse than second hand cigarette smoke. If you have a laser printer, consider putting it in a well-ventilated, infrequently used space.
  • Kitchen Stove – If you have a gas stove, it releases Nitrogen Dioxide when on, an unsafe gas that is odorless and fills your home quickly. This gas is bad for respiration and can cause asthma attacks. To solve this problem, simply make sure you stove is ventilated properly when cooking.
  • Spackle – Old spackle – the kind used before the 1980s often contained asbestos which can still be there, waiting to be disturbed. Old asbestos, while not inherently dangerous, will become so if you start doing work in your home or if the spackle starts to wear away. To solve this problem either call an abatement firm or cover the offending wall with a new layer.
  • Drapes – Those drapes are filled with contaminants that cling there, especially if humidity is a problem in your home. Dust mites in particular are bad for your health and can cause asthma and other allergies. Blinds are better than drapes for this reason.

Your home is filled with potentially dangerous problems, but you can avoid them simply by taking care to ventilate, clear away unsafe products and keep things like drapes clean (or remove them). If you’re still concerned about your air quality, call an expert to investigate.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Happy Halloween Weekend! (and Surprising Sources of Indoor Air Pollution)

Allergens Affected by Indoor Air Quality Systems: A Guide from Saddleback Plumbing

Wednesday, October 19th, 2011

Indoor air quality devices are designed to capture and remove certain allergens from the air, but what exactly is being removed and how would those allergens affect your health if left to circulate in your Irvine home? Here is a quick rundown of common allergens found inside the average home and why you should have them removed:

  • Dust Mites – Dust mites develop in high humidity conditions – above 50%. This means that dehumidification (which can be done with an air conditioner) to a healthy range between 35-50% will keep them from developing and ensure your indoor air stays comfortable and safe. Dust mites are not dangerous but they can severely increase complications from asthma and other uncomfortable conditions.
  • Animal Dander – Dander from cats, dogs, birds and other furry or feathered creatures is a common allergen for millions of people. If you suspect dander as an allergy, go on vacation to a place without dander and see how it affects you or your loved ones.
  • Dust and Dirt – Dust is in every home and while it is a common irritant, it can inflame asthma or worsen allergies many times over.
  • Pollen – Pollen is a problem for anyone with seasonal allergies or hay fever. While medicine can help, proper sealing of your house and indoor air filtration can reduce the presence of pollen from clothing and animals.
  • Bacteria and Viruses – Bacteria can develop in the air from common colds, old food or outside contaminants. Use a UV light to remove these from your air handler or ductwork.
  • Smoke and Exhaust – Indoor/outdoor ventilation can allow in smoke and exhaust that irritates most lungs. To avoid this problem install an electronic air cleaner that can target particles in smoke.

Getting rid of allergens in the air is an important aspect of maintaining a clean and healthy household. Proper air cleaning, filtration and UV purification will reduce these allergens many times over. There are also some great tips on the Asthma and Allergy Foundation website for how to reduce the presence of those allergens to start with.19

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Allergens Affected by Indoor Air Quality Systems: A Guide from Saddleback Plumbing

How Bad Is the Air in Your Home? Saddleback Plumbing Investigates

Wednesday, October 12th, 2011

Every day in Irvine you hear about another awful contaminant that can get into your home’s air supply. Radon gas. Carbon Monoxide. Nitrogen Dioxide. Smoke. Mold. The list gets longer with each passing year and many homeowners are understandably worried. However, before you run out and by the newest lineup of filters, purifiers, and UV lights, stop and think about just how bad your indoor air actually is.

When Was Your Home Built?

Homes built in the last 10-15 years tend to be well ventilated and may even have air quality systems already in place. It’s those built in the late 1970s and early 1980s that tend to have the worst ventilation (assuming they have not been updated since then).

This kind of poor ventilation can be dangerous, but usually only in that you have less fresh air and more indoor allergens and contaminants. Specifically, you’re most likely to suffer from things like pet dander, dust, pollen, and dirt in the air. On their own, these are not dangerous, but without fresh air to circulate them outside and ensure you get a steady, clean supply of air to breathe, they can make you ill.

How Bad Can It Get?

While it’s rare, some homes suffer from more advanced contaminations. The most common is mold. Mold grows primarily in dark, damp spaces. If your humidity levels get too high in the summer, the ductwork in your house is perfect for mold and it will blow the spores directly into your air, putting everyone at risk.

Outdoor contaminants can also make it into your indoor air. Things like exhaust and smoke, gas, radon, or other outdoor pollutants should be tested for when you setup a new indoor air quality system. There are filters and purifiers that will remove almost all of these contaminants, but they are not always required, so you should check before making a decision.

Ultimately, the odds are that your home suffers only from some stale, dusty air. But, it is very important to keep everything clean and test it regularly to make sure nothing worse develops. Poor air quality is about more than just comfort – it’s an honest health issue.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on How Bad Is the Air in Your Home? Saddleback Plumbing Investigates

How Can I Fix a Leaky Faucet? A Question From Irvine

Monday, September 12th, 2011

Leaky faucets certainly are not the type of emergency you want to call an Irvine plumber for, but they are also pretty inconvenient and annoying. Fortunately, they are often quite easy to fix. The proper procedure for fixing a leak in your faucet will depend on the type of faucet you have, but it is always a relatively simple task.

If you know what type of faucet you have, you are ahead of the game. But if you do not, you will need to take your faucet apart first to see what is going on in there. Especially in older homes, the most common type of faucet is a compression faucet. This means that inside the faucet there is a rubber washer that helps to create the seal when the faucet is tightened.

When faucets like this leak, chances are it is simply because the washer has worn out and needs to be replaced. Before you can start working, you will first need to turn off the flow of water to your sink. There should be a couple of knobs under the sink that allow you to do this. And be sure to cover or plug the drain before you begin so that you do not accidentally drop anything down it as you are working.

Once you have set yourself up, unscrew the faucet handles (or whichever one is leaking) and remove the outer part. At this point, you should be able to see the washer. Simply remove it and replace it with a new one and then put the faucet handle back on and you should be as good as new. These types of washers tend to wear out from time to time, so  you will probably have to do this again in a few years or so.

When you are replacing your washers, though, it is important to remember a couple of things. First, if you are unsure about what type of washer to put in your faucet, take the old one to the store with you and ask a salesperson for help. You want to make sure that the washer you put in is exactly the right fit for your fixture so it is worth taking the extra step to ensure that you have the right piece.

And after you have taken apart the faucet, it is a good idea to check the stem to see if that has worn out and needs to be replaced as well.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on How Can I Fix a Leaky Faucet? A Question From Irvine

Installing Drainage System: Why Call a Plumber?

Friday, March 11th, 2011

A proper drainage system is a great asset when you are trying to improve the appearance of your lawn or increase your landscaping options. A lawn that does not drain right will have dry and wet spots that make it difficult for plants to grow. Your lawn will develop a spotty appearance because of these types of areas and you will probably also have a smaller area to work with in general.

With a good drainage system, on the other hand, you can make use of your entire yard. As long as water can reach all areas but does not linger too long in any one of them, all of your plants should be able to grow nicely. This is often a project that handymen are inclined to take on themselves, but there are several potential pitfalls when you do. It may not seem all that complicated to put in a drainage system, but you do need to know what you are doing if you want to get the job done right.

In order to function properly, a drainage system needs to be installed on a slope. Water will always run downhill, so making your drainage system run downhill will ensure that gravity will do all the work for you. If the proper slope is not maintained, however, there are plenty of areas where water can pool.

That is exactly the type of situation you are trying to avoid by putting the drainage system in, so all of your hard work could be for nothing if you do not get the slope calculated correctly. While this type of measurement and calculation can be challenging for you, it is second nature to a professional plumber. Hiring an expert to help you with this area of your drainage system is the best way to make sure you have the right setup planned.

You will also need to know where to lay out the drainage system. This involves analyzing the sources of water in your yard and understanding what you need to do to move it from one area to another. Again, this can be a challenging if not overwhelming aspect of the project for a layman, but for a professional it is simply part of the job.

On top of all of that planning, you will need to have the right tools and materials to put the drainage system together. Plumbers already have all of this on hand and they know which tool to use when. Your project will go much more smoothly and you will be assured of much better results if you use a professional to install your drainage system.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Installing Drainage System: Why Call a Plumber?