Saddleback Plumbing Heating & Air Blog: Posts Tagged ‘Northwood’

Balboa Heating Installation Question: What Makes a Furnace High Efficiency?

Wednesday, January 18th, 2012

You’ve probably heard about the new lines of high efficiency furnaces being released by popular home heating companies in Balboa, but what exactly is different about these high efficiency devices from your current furnace? Let’s take a closer look at what a high efficiency furnace offers and why it can save you money.

Added Features

A high efficiency furnace uses familiar technology in a new way to reduce the amount of energy lost when combustion takes place. This means:

  • Sealed Combustion – Instead of open combustion which allows heat to escape during and after the combustion process, a high efficiency furnace uses a sealed chamber with carefully measured and fed airflow to burn fuel and produce heat. Exhaust heat can then be recaptured and used to heat air transferred to your air vents.
  • Two Stage Gas Valves – With a two stage gas valve, your furnace can respond to the temperature outside. There isn’t just one “on” switch. The furnace will regulate gas flow based on how much energy is needed to produce heat for your home. So, if there is a sudden burst of cold outside, the furnace will respond accordingly, but for most days when heating needs are low, it will use only the minimum amount of needed gas.
  • Programmable – High efficiency furnaces are now programmable, meaning you can set specific time limits for operation, change thermostat settings digitally and inspect the device through an electronic read out. The level of control given to you by a programmable high efficiency furnace can greatly reduce gas or electricity consumption.

Cost Benefit

The real reason many people are interested in high efficiency furnaces is that they are so much less expensive to operate. Instead of costing hundreds of dollars to run through the winter, they operate the bare minimum needed to heat your home. Using up to 95% of the fuel they consume to produce heat and regulating gas to cut how much is consumed during milder days, these furnaces are built to save you money.

If you have an old furnace in your Balboa home that chews through energy like nobody’s business, now might be the time to consider the benefits of a brand new, high efficiency model.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Balboa Heating Installation Question: What Makes a Furnace High Efficiency?

High Efficiency Northwood Furnaces: Chimney Concerns

Wednesday, January 11th, 2012

When upgrading to a high efficiency gas furnace in Northwood, you may need to make some upgrades to your chimney. Older chimneys built for standard furnaces with normal exhaust needs are not built to the specifications needed by today’s high efficiency models. Not only is it unsafe to leave it as is, but the cost of repairs if you don’t have it upgraded can be substantial.

Down-Sizing

A common concern when upgrading to a high efficiency gas furnace is the issue of condensation and draft. Because the amount of exhaust being vented is reduced by a high efficiency furnace, your current setup is not sufficient for the new model. So, it needs to be reduced in size by a professional to avoid backup of exhaust. Proper chimney sizing is a complex process that requires professional guidelines and careful measurements of all appliances in your home.

Because the chimney often isn’t used at all for a high efficiency furnace (often PVC pipe used instead), the extra airflow in the chimney can become a major issue.

Chimney Condensation

The biggest concern for the chimney when changing the furnace efficiency is condensation. Specifically, acidic condensation droplets can build up in the chimney if not properly stopped. A new chimney liner must be placed in the chimney to avoid excessive corrosion due to the acid droplets. Keep in mind that the efficiency of your new furnace will determine whether you will use the traditional chimney for exhaust or if a new line will be installed to vent your furnace.

When to Take Action

If you have your furnace replaced, your Northwood technician will likely discuss the chimney situation in your home with you. Keep in mind that this might be necessary and that there might be an added cost involved because of it. Modern furnaces are not designed to accommodate aging chimneys and your safety and the integrity of your house are at risk if you don’t retrofit the chimney if necessary.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on High Efficiency Northwood Furnaces: Chimney Concerns

Furnace Tip 1: How to Fix a Faulty Furnace Blower

Monday, January 9th, 2012

The blower fan on your furnace is designed to distribute warm air through the ductwork in your Talega home evenly, ensuring you use all of the energy consumed by your furnace. If the blower doesn’t turn on when the furnace turns on or it continues to run when the furnace is off, it can cost you money and result in cold rooms. Here are some tips on how to fix a faulty furnace blower.

What is the Problem?

First, check to see what the problem is. If your furnace blower remains on all of the time, it may be a thermostat issue. Make sure the fan isn’t set to stay on continuously (a common setting for most air handlers). You should also check the limit control switch to make sure it is working properly. If this is broken, it needs to be replaced which is a relatively simple fix.

If the furnace blower isn’t turning on at all, you may have a belt problem. This can be fixed by you if you have the proper tools. To repair the belt problem, first turn off all electricity to the device. You’ll need to remove the old furnace blower belt, so release the tension in the pulleys before removing the belt.

Installing a new belt is not unlike doing so for your car. Make sure to check the blower or your user manual for proper tension when you install the new belt. Make sure you purchase the right size belt and set it to the right tension. If you cannot or you do not feel comfortable doing so, you should call a professional to inspect and repair the problem for you.

Getting the Blower Back Up and Running

Once your new belt is in place, test the system carefully, starting with the lowest setting (if there are variable settings). If it does not yet work or if something sounds strange, call a Talega heating and air conditioning technician right away. You don’t want the motor to burn out or something else more substantial to go wrong with your furnace or air handler during the middle of the winter.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Furnace Tip 1: How to Fix a Faulty Furnace Blower

Signs that You Have Hard Water in Brea

Monday, December 26th, 2011

Hard water is fairly common, especially in certain regions of the country. It is called hard water because of the minerals in it, such as calcium, iron and lime. Depending on how “hard” the water is, it’s usually perfectly healthy, but can cause some other problems throughout your Brea home.

Hard water can negatively affect the durability of household appliances like dishwashers and washing machines, as well as pipes and fixtures throughout the home. How do you know if you have hard water? Here are some common signs and symptoms to be on the lookout for:

  1. A white, scaly, filmy residue left behind on plumbing fixtures. In particular, you may notice these on showerheads, on stainless fixtures like the basin of your kitchen sink, on your silverware or in the coffee pot.
  2. Clothes that are not getting as clean as they should in the laundry. This is because hard water is less effective at washing away dirt. Likewise, you may notice soap scum residue in your tub or shower.
  3. Little or no lather from shampoo or soap while showering.
  4. A reddish tinge to hair over time. This is due to iron in the water that can temporarily change hair color in the shower.
  5. Water takes a long time to heat, or heating costs that are higher than usual. This is because hard water requires more heat than water with fewer minerals in it.
  6. A foul odor emanating from your water.

If you notice any of these signs, or a combination of them, you may have hard water. There are certain things you can do to control the effects of hard water, such as using a commercial mineral remover to dissolve deposits left on showerheads and other fixtures. Vinegar also works well.

However, the best thing to do is to treat hard water so that it does not damage your plumbing system. A licensed Brea plumber can help you do this by adding water softener to your water supply, among other treatments. These are things that need to be done on an ongoing basis, but will help extend the life of your expensive appliances and plumbing system.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Signs that You Have Hard Water in Brea

Furnace Safety: Some Advice from Saddleback Plumbing

Wednesday, November 16th, 2011

There are many advantages to a properly operating furnace; the most important are the safety and comfort of your Northwood home’s occupants. There are several things you can do to ensure the safe operation of your furnace.

Here is a checklist of ideas:

  • Clean or change furnace filters on a regular basis. Replace disposable filters and clean permanent filters using water or cleaning solutions. Your owner’s manual or a qualified heating contractor can suggest a regular maintenance schedule.
  • Check the exhaust vent from the furnace. Clear obstructions such as leaves, clothing, or animal nests from the vent pipe or chimney. Keep roof exhaust vents clear of snow. If there is a faulty exhaust system (like a blocked flue), of if there are cracks and leaks in the pipes or improper adjustment of the burner, or if there is lower air pressure indoors than outside, the furnace can create serious indoor air pollution.
  • A clear air intake is important too, since furnaces need fresh air to “breathe” and complete the fuel burning cycle. Again, check for debris, snow, or animal nests in intake pipes.
  • If you have an older gas furnace, you may want to install a supplementary induced-draft fan that reduces the possibility of backdrafting. Some furnaces have automatic shutoff devices that turn off the furnace if it begins to backdraft.
  • Check internal components such as the blower motor and vacuum any dirt. Check belts and pulleys for excessive wear. You should consult your owner’s manual for any suggested maintenance tips on internal working components.
  • You may also want to check the pilot light to see if it is working and if it producing an even, blue flame. If the flame is uneven, it may be a sign of incomplete gas combustion, which can result in the creation of dangerous carbon monoxide gas.
  • Ensure that your thermostat is operating correctly by raising or lowering the temperature settings to make sure the furnace cycles on and off.
  • Install and maintain battery or hard-wired smoke and carbon monoxide detectors.

Externally vented natural gas furnaces, when properly designed and installed, will operate safely for years. But if you detect a problem, use the most common solution – contact a qualified heating professional to check out your furnace.

Continue Reading

Tags: , , , , , , ,
Posted in Services | Comments Off on Furnace Safety: Some Advice from Saddleback Plumbing

Federal Energy Efficiency Rebates Explained

Wednesday, August 31st, 2011

You’ve probably seen the advertisements and heard the sales pitches all over Santa Ana. Upgrade your furnace, air conditioner, water heater, or insulation and receive a federal rebate on your taxes for a percentage of the installation cost. The government is seriously invested in improving the energy efficiency of the country, cutting electric bills and helping people stay comfortable. Here’s a quick look at some of those rebates and how you can tap into them.

Energy Efficiency Credits

There is a standard tax credit of 10% of the cost up to $500 or a specific amount between $50 and $300 for any upgrade made to your existing home for heating, ventilation, air conditioning, insulation, roofs, or water heaters. These upgrades must be made on an existing home in which you currently live – rentals and new construction homes are not eligible.

Green Energy Credits

Even better credits are available if you plan on installing a geothermal heat pump, wind turbine or solar system – either PV panels or solar heating. The tax credit here is 30% of the cost with no upper limit. This applies to any existing or new homes and can be applied to both primary and secondary residences.

Are the Tax Credits Worth It?

The big question is whether these credits are worth the investment in a brand new system? For the most part, it depends on your particular situation. If you have a 30 year old furnace and are planning on an upgrade anyways, why not take advantage of a nice rebate and get a more energy efficient system to go with it? However, if you just replaced your furnace three years ago and it works very well with a high energy efficiency rating, it might not be worth the investment.

Learn More

The Energy Star program run by the EPA contains detailed breakdowns of the 2011 tax credits, including what systems are eligible and how to go about claiming them on next year’s taxes. Learn more by visiting their official page.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on Federal Energy Efficiency Rebates Explained

The Effect of Dust Mites on Indoor Air Quality: A Guide From Northwood

Wednesday, August 24th, 2011

There are three types of indoor air pollutants that affect your Northwood home – particles, bioaerosols and gases. Dust mites are a special case because they are nearly invisible to the eye, but represent a substantial bioaerosol that can make it harder to breathe and result in a number of sometimes debilitating symptoms.

What Are Dust Mites?

Dust mites are tiny arachnids related to ticks and spiders that cling to fabric like curtains, carpet and upholstery. They resemble dust in the air and thrive in high humidity conditions. So, the easiest way to treat a dust mite problem is with proper dehumidification. Knowing whether dust mites are a real problem if you simply have a lot of dust and pollen floating around is tough. Here are some common symptoms to look for:

  • Dizziness
  • Nose Irritation
  • Respiratory Irritation
  • Cough
  • Chest Tightness
  • Asthma (made worse)
  • Allergic Reactions

Because dust mites are alive when you breathe them in, they can cause severe irritation to your throat and lungs and result in a number of uncomfortable reactions – ranging from a runny nose to a full blown allergic reaction.

Getting Rid of Dust Mites

So, how do you get rid of these tiny arachnids? The first step is to improve the humidity level in your home. Anything under 50% humidity makes it impossible for dust mites to survive, so air conditioning in the summer and dehumidification in the spring and fall are the best steps to remove the threat of these little bugs.

Tiny dust mites are among the larger air pollutants and can be captured by most MERV 10+ filters on the market. A HEPA filter will absolutely remove them as well, along with any other particulate or bioaerosols in your home.

If you suspect you have a dust mite problem, call an HVAC contractor for indoor air quality testing. They can provide you with a better overview of what actual issues you might have and the best possible solution.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on The Effect of Dust Mites on Indoor Air Quality: A Guide From Northwood

Maintenance: Cleaning Your Conditioner Coil Will Save You Headaches Later

Friday, July 29th, 2011

You have plenty of things to clean all over your house. But do you really have to clean your air conditioner too? Well, if you want it to keep working well, you do. In fact, cleaning the coil of your air conditioner is a quick and easy process, especially if you do it on a regular basis, and it can save you a great deal of frustration later on.

Like any machine, your air conditioner needs a tune up from time to time in order to continue to function properly. While a lot of this is taken care of if you have an annual maintenance service performed by a professional, your air conditioning coil will benefit greatly by being cleaned more often than that.

In fact, during your annual maintenance visit, your air conditioning technician can easily demonstrate for you how to get to the coil and clean it. This is a relatively easy task that you can carry out every month or so when your system is in use to help ensure optimal health and functioning for your system.

Of course, your air conditioning system will still run whether you clean the coils on a regular basis or not. For now, that is. Allowing more and more debris to build up on the coil, however, can have a big impact on the overall energy efficiency of your unit. An air conditioner with a dirty coil will have to work harder to keep your house cool, and that will be reflected by an increase in energy consumption.

Also, an air conditioner with a dirty coil that is having to work harder to keep your house cool will wear out more quickly than one that is working properly without added impediments. The added wear and tear that this causes to various other parts within your air conditioner can cause them to malfunction and need to be replaced sooner than they should.

This means more costly repairs, even if they are minor ones. It also means that your entire air conditioning system will probably not last as long as it may have with proper care. You will have to replace it sooner, adding even more to the cost of having and running the equipment.

Cleaning your air conditioner coil regularly is a simple and effective way of helping to keep the entire system running smoothly and efficiently for many years to come.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Maintenance: Cleaning Your Conditioner Coil Will Save You Headaches Later

The Energy Star Label

Friday, June 24th, 2011

The Energy Star program is a joint program of the US environmental protection agency and the US department of Energy. The program’s goal is to help consumers save money and protect the environment through energy-efficient products and practices.

The best-known aspect of the Energy Star program is the Energy Star label, which is awarded to appliances and other items that are significantly more efficient than average. Energy Star efficiency guidelines vary depending on product category, but in general, Energy Star products use 20%-30% less energy than minimum federal standards.

The Energy Star guidelines were designed both with energy efficiency and performance in mind. While low energy use is one of the most important criteria for selecting Energy Star appliances, product performance, features, warranty, safety, and durability are also taken into account. Price is also a factor: if a product costs significantly more than other products in its category, it will only receive the Energy Star label if the up-front cost will be recovered through savings in operating costs within a reasonable amount of time.

The first Energy Star labels were given to computers and monitors in 1992. Now labels can be found on many other products, including:

  • Furnaces
  • Hot water heaters
  • Air conditioners
  • Dishwashers
  • Refrigerators
  • Light bulbs (florescent and LED)
  • TVs

Energy Star products can be found wherever appliances and electronics are sold. Look for the blue and white Energy Star label. You can also look for the yellow EnergyGuide label that is affixed to most heating and cooling systems and household appliances. This label is created by the Department of Energy and shows a product’s annual cost of operation compared to similar models. It will often indicate whether a product is Energy Star.

It’s important to note that while an Energy Star label indicates that a heater, air conditioner, or household appliance is more efficient than the minimum guidelines, it does not always mean that you are getting the most energy efficient option on the market. If you are making a major appliance purchase, use the Energy Star label to be sure every model on your “short list” is energy efficient. Then, look carefully at the EnergyGuide label to compare the efficiency of the models you are considering.

The EPA has also extended the Energy Star label to cover new homes and commercial and industrial buildings. To qualify for the Energy Star rating, a new home must use at least 15% less energy than standard homes (built to the 2004 International Residential Code). Energy Star homes usually include insulation, high-performance windows, energy-efficient heating and cooling systems, appliances, lighting, and water heaters.

The Energy Star standards and label have been recognized in many other countries, including Canada, Australia, Japan, New Zealand, Taiwan and the European Union.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on The Energy Star Label

What Is the White Substance around My Showerhead and Faucet, and Why Is it There?

Monday, June 13th, 2011

For many people, it is common to notice a buildup of some type of white substance on showerheads and faucets around the house. Of course, this looks bad and would seem to indicate a problem. But what is it really? And what can you do about it?

Well, to begin with, this type of buildup is usually nothing more than mineral deposits. The minerals are in the water that flows through the faucets and can settle out on the fixtures, particularly in the shower where a lot of the water you use evaporates. When the water evaporates, it leaves these mineral deposits behind, and they can cause quite a buildup over time.

In areas where the water is very hard, this type of buildup problem will be greater, but it is actually a relatively easy problem to fix. The best way to get these mineral deposits off of your shower and faucet fixtures is to allow them to soak in vinegar overnight. After an appropriate period of soaking, the mineral deposits should come off easily with moderate scrubbing.

But no matter how many times you remove these deposits, they will always come back. They are simply a result of the makeup of your local water, and so unless you take greater action, you will have to repeat this process on a regular basis if you want to stay residue free.

However, there is another option. Rather than having to soak all of your fixtures in vinegar every so often, you may want to consider having a water softening system installed in your home. These systems are appropriate in areas where the water is very hard and they can go a long way towards eliminating buildup of sediments and minerals all over your home water system.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on What Is the White Substance around My Showerhead and Faucet, and Why Is it There?