Saddleback Plumbing Heating & Air Blog: Posts Tagged ‘Santa Ana’

Air Conditioning Tips: Causes of AC Short Cycling

Monday, June 11th, 2012

A common problem with Orange County air conditioners is short cycling.  Short cycling is when an air conditioning unit will have either short run times or short off times.  This type of quick movement back and forth between being on and off–or rather starting and stopping rapidly–can be detrimental to the overall life of an AC unit, and is also not energy efficient.

There are quite a few air conditioning repairs that can be made to solve this short cycling problem.  Below are the main causes for air conditioning short cycling, which can be checked, diagnosed, and fixed quite easily.

  • AC Refrigerant Leak:  There could be a refrigerant leak somewhere within the AC unit.  A temporary fix might be to add refrigerant and recharge the air conditioning unit, but long-term, an HVAC specialist will need to be contacted in order to find and fix the leak properly, ensuring excess money is not paid to continually add an unnecessary amount of refrigerant.
  • AC Coil Icing: This means that the evaporator coil or cooling coil has become encrusted with ice or frost and is causing the unit to malfunction by turning on and off in short bursts.  Turning off the unit completely and letting the ice melt, then checking and replacing dirty filters can oftentimes fix this problem.
  • AC is Oversized:  The amount of power needed (or the BTUs needed) to cool a space is directly proportional to the size of the space or room which is being cooled.
    • If AC short cycling has been a constant problem since day one of an AC system installation, it is entirely possible that the A/C unit is too large for the space which it is cooling.  This could mean contacting an HVAC technician to have the unit analyzed and a new, smaller unit put in.
    • If A/C short cycling is a relatively new problem, some possible causes could be: closing or opening doors which previously were not closed or opened frequently, or the addition of partitions within rooms which effectively makes the room size smaller.  This could mean simply adjusting the thermostat, or the blower fan to a lower speed to compensate for the change, or opening interior doors to increase the size of the space which is being cooled by the AC unit.
    • AC Control Board Problem:  While less likely, the problem could be in a control board or control switch which has been damaged, thus causing erratic and rapid starting and stopping cycles.  In this case an HVAC technician would need to be contacted in order to replace the broken control switch.
    • AC Compressor Damage or Start-Up Issues:  Some AC systems have hard-starting compressors which take time to re-pressurize properly after shutting down.  If the AC system is being turned on or off manually on a frequent basis, the compressor might have a hard time restarting because the high pressure which had built up on the previous on-cycle had not had a chance to come down to normal levels again.  An easy way to diagnose this problem is if after leaving the AC unit shut off for thirty minutes, the unit works properly after being turned on again.  To help this compressor issue, an HVAC service technician can add a starter capacitor to the AC unit.

These and other AC short cycling causes can be checked, diagnosed, and fixed quite easily by calling Saddleback Plumbing.

Continue Reading

Quick Tips to Save Money on Air Conditioning

Monday, February 6th, 2012

In Orange County you’ve probably heard once or twice that the cost of running your air conditioner is more than that of any other single electrical device in your house. That means you’re spending hundreds and possibly even thousands of dollars each and every year to stay cool. It’s well worth the investment as the risk of not having air conditioning is much too high, but there must be ways to cut the costs, right? Read these quick air conditioning maintenance tips below, there are some things you can do to slash those costs. Here are a few of the easiest:

  • SEER Matters – What is this magical acronym you hear so much? SEER refers to how many BTUs your air conditioner can produce with a single watt of electricity. A low SEER device therefore uses a LOT more electricity to produce the same volume of cooling as a high SEER device. Since current devices offer SEER of 13 or higher (some are up to 20+), just about any upgrade will save you money relatively quickly if your current air conditioner has a rating of 8 or lower.
  • Program Your AC – If you have a single point analog thermostat, you’re wasting a LOT of electricity. You’re either paying to cool your house while it’s empty or you’re coming home to a roasting hot living space. Purchase a programmable unit and set the system to 85 degrees when you’re not home. With timers in most digital units, you can tell it when you’ll be home so that you walk into a cool, comfortable space without having to keep it cool all day long.
  • Use the Landscape to Your Advantage – Instead of relying solely on your air conditioner to keep the house cool in the summer, plant some trees and shrubs around the house to block the sunlight. Simply adding some shade to your property can directly reduce how much heat your home absorbs throughout the day and reduce how much your AC unit needs to work to keep you cool.
  • Ventilate Your Roof – A good third of the heat in your home is absorbed directly through the roof. To keep this heat from affecting the rest of your home, install a roof fan that ventilates the excess energy and keeps the attic at a steady temperature. Less heat up top means less cooling needed down low.

A good air conditioning system is effective no matter what the temperature does, so it’s easy to forget how big your bill will soon be. To avoid an overblown bill, keep an eye on your cooling and follow these simple tips to cut back on use.

Continue Reading

Signs of an Undersized Furnace

Monday, January 23rd, 2012

If you’re purchasing a new furnace for your Santa Ana home, you want to avoid buying one that is undersized for your particular space. To do that, here are some common signs that the furnace isn’t powerful enough for the heating needs of your home. These signs might appear for an older furnace as well, especially as it ages and loses its ability to provide adequate heat for your home.

Maintaining Temperature

The most common (and in many cases only) sign that your furnace is undersized is that the device simply doesn’t maintain the temperature in your home properly. This means that when turned on to full and left for a few hours, your furnace doesn’t heat your home to the thermostat setting.

This can be due to an improper load calculation or a load calculation that wasn’t taken at all. The perfectly sized furnace will heat your home evenly on the coldest day your area is likely to have. So, undersizing should be pretty evident – if it doesn’t heat your home evenly and it’s not exceptionally cold outside, you might not have enough BTUs under the hood.

How to Fix the Problem

The problem is one that varies depending on the severity of the undersizing. Modern furnaces are often available with two stages, meaning they can operate at both a low BTU rating (often around 40K or so) and a higher BTU rating (70K or higher). This is the perfect solution for homeowners worried about undersizing because it ensures that your home always has enough heat in reserve should the weather get exceptionally cold.

For example, most furnaces are sized for extremely low temperatures, but if the temperature jumps up to 50 degrees F outside, your furnace is now oversized for that weather. A two stage furnace offers solutions for both common conditions and extreme conditions and will resolve most of the concern you have about undersizing and not having enough heat to offset outdoor temperatures.

Continue Reading

Common Garden Grove Furnace Problems

Monday, January 2nd, 2012

When it comes to your home Garden Grove furnace, you simply want it to work all of the time. But just like any other piece of equipment, your furnace will have problems from time to time. A few of these are relatively simple to fix on your own, but for the most part you’ll need to call in someone to take care of the repairs for you.

However, before you can do that, you’ll need to recognize that a problem exists at all. And the earlier you notice the warning signs, the better off you’ll be. It’s always better to get a furnace problem taken care of right away than to wait until your furnace stops working completely.

It’s also good to remember that quite often the problems you’re having with your furnace are really originating with your thermostat. This is usually welcome news, as thermostats are much cheaper and easier to repair and replace than many other parts of your furnace. In fact, even if your furnace isn’t working at all, it may only be the result of a faulty thermostat.

Another problem you may start to notice is that one part of your Garden Grove house is being warmed more than another part. When this happens, it can be a sign that there is something wrong with the furnace, but it may also be that the pressure in your duct system is not balanced properly. A simple rebalancing of this system can have your house heating evenly again in no time.

You may also realize that your furnace seems to be cycling on and off too often. When a furnace is working properly, it will come on for a considerable period of time and then shut off until the temperature in the house drops below the desired level. However, some problems can cause your furnace to complete many short cycles rather than fewer short ones.

If this is happening to your furnace, there are several possible causes. Something might be wrong with the blower on the furnace or the thermostat might not be feeding the furnace the correct information. Another possibility is that your furnace’s air filter is dirty or clogged.

While there are sometimes simple and straightforward solutions to these types of common furnace problems, it’s best to call in a Garden Grove professional to have them take a look if you’re not sure where to start searching for a problem. In most cases you’ll need them to come out and make the necessary repairs anyway.

Continue Reading

How to Make Your Santa Ana Heating System More Effective

Wednesday, December 7th, 2011

Everyone wants an effective heating system in Santa Ana– one that will provide steady, reliable heat without you having to spend hundreds of dollars each month on gas, oil or electricity. And while the best way to improve the efficiency of your heating system in most cases is to upgrade it, there are some simple things you can do around the house to boost its effectiveness. Here are some of the best:

  • Rearrange Furniture – Just having the heat on doesn’t necessarily ensure the heat entering your room is being distributed evenly. Move your furniture in such a way that there is a clear, unimpeded path from the registers and radiators to the rest of the room. Done properly, this will make it much easier to and faster to heat every room of your house.
  • Maximize Air Flow – Air flow can be maximized in a number of ways. Make sure you close any windows near a register or radiator and that you remove any large objects that might block air flow. You should also install things that can help move air like fans and always call someone in for changes to the arrangement of your vents or radiators.
  • Clean Registers or Radiators – The cleaner your radiators or dust registers are, the more efficiently they release their heat. Not only have that, but clean radiators and registers resulted in better indoor air quality. Weekly cleaning of each room’s heating source is highly recommended.
  • Install Ceiling Fans – Ceiling fans switched to blow down are incredibly effective for distributing air throughout the room. This will keep push warm air down and keeps cold air up – in effect, reducing the need for constant running of your furnace.

Effective heating is important to keep your home comfortable, reduce the cost of heating and prolong the lifespan of your furnace . You should also make sure your heating system is properly maintained throughout the year. Skipping maintenance visits (which are highly recommended annually) will put unnecessary stress on your system and shorten its lifespan substantially, not to mention the decrease in efficiency when heating your home.

Continue Reading

Testimonial – Tim B. from Santa Ana

Monday, November 21st, 2011

Water damage can be very destructive and very expensive to repair. That is why it is so important to catch plumbing problems early and repair them competently. And our plumbers make sure to do the job right the first time; here is what Tim B. from Santa Ana wrote to us about his plumbing installation and repair:

I’m writing to let you know how happy I am with the service Ken Smith provided to us today. I originally had Ken out to install a new kitchen faucet.

After he expertly completed that job, I told him about some problems we started having the day before with our hot water flow. The day before, a hack “contractor” installed a shower valve – and that is when the problems started. Ken took one look at what the previous guy had done and saw major issues. He took the time to fix the previous contractors huge screw-up and patiently answered the many questions I had about what he was doing and how the shower plumbing worked.

The project was set to tile in (and over) the bad plumbing job the next day. Had Ken not spotted and fixed the trouble, the problem would have been 10 times worse and a lot more expensive in 24 hours.

Thanks a million Ken for your hard work and dedication to getting the job done right. I owe you!

I’ll be calling Saddleback Plumbing and requesting Ken for anything regarding plumbing in the future.

– Tim B.

Continue Reading

It’s Time for a New Furnace: a Tip from Saddleback Plumbing

Wednesday, November 2nd, 2011

Replacing your furnace in your Santa Ana home is probably not something you want to think about. After all, a new furnace is a big investment and not something you probably have too much experience with. And sometimes having your current system fixed or tuned up is all you need to get your home heating situation back on track. But there are certain situations in which it makes more sense to just go ahead and get a new furnace rather than simply patching up the old one.

For instance, if you have to call for either minor or major repairs to your furnace on a regular basis, it’s probably time to consider investing in a replacement. All of those repairs cost money and chances are that the furnace you’re paying repeatedly to replace isn’t going to last that much longer anyway.

Rather than continuing to dump money into a furnace that just isn’t cutting it anymore, you’ll be better off making the investment in a new unit. The truth is, you’re going to have to do it sooner or later and by buying a new furnace now, you’re actually saving all of the money you would have spent on repairing the old one for another year or so.

Also, a furnace that requires such frequent repairs is probably not functioning all that efficiently either. When you replace it with a newer model, you won’t just save money on repairs. You’ll also likely notice a considerable savings on your monthly energy bills because of how much more efficient your new model is.

Even if you haven’t been repairing your furnace often, you may be able to notice some signs that the old unit isn’t quite up to the task anymore. If you’re suddenly having some significant humidity problems in your house or if your home isn’t being heated evenly, there’s a good chance your furnace is on its way out.

And, in fact, even if your furnace is functioning just fine but is more than 10 years old or so, it’s very likely you’d benefit by replacing it. That’s because the newer furnaces available now are so much more energy efficient than their predecessors that the savings you’ll incur monthly will quickly make up for the initial installation investment.

Of course, you don’t want to get rid of a good furnace if you don’t have to. But if your furnace is getting close to the end of its expected lifespan, you may very well benefit by putting out the money for a new one now so you can start saving right away on your monthly energy bills.

Continue Reading

What is Air Purification? A Question from Garden Grove

Wednesday, October 26th, 2011

The air around us is getting more and more polluted these days in Garden Grove, and people are trying to do more and more to combat it. Cars come with ratings like “ultra-low emission vehicle” and windmills generate power from moving air rather than burning coal. No doubt, these efforts help, but if you want to take an active role in improving the quality of air in your own home, consider an air purification system.

Simply put, air purification is the process of removing contaminants and pollutants from the air. There are a number of devices on the market that can purify the air in your home. While anyone can enjoy the benefits of cleaner air, they are of particular utility for people which suffer from asthma or allergies, or who live in areas with higher concentrations of outdoor air pollution.

There are three main kinds of air purifiers, categorized by the kind of technology they use:

  1. HEPA filtration
  2. Negative ion generation
  3. Electrostatic precipitation

HEPA filtration purifiers simply filter the air that passes through them using a sieve-like filter or series of filters. Depending on the efficiency of the device and the filter, some of these purifiers can trap not only solid and like particles, but also gases and odors. One advantage of this type of purifier is that the HEPA filters can last for years before they need to be changed.

Negative ion generation and electrostatic precipitation models are more complicated and technical because of the technology they use. Consult with a professional to choose which kind of technology is best for your needs, depending on the air quality problem you are experiencing. Some air purifiers can trap bacteria, viruses, fungi or chemicals, so there is bound to be one that will suit your needs.

After deciding on which type of technology you need, you will also have to choose whether you want a portable air purifier unit or a central system that covers the whole house. Obviously the former works well if you are only concerned about the air in a room or two, while the latter is better if you have chronic asthma or a more widespread air quality problem.

Continue Reading

Where to Turn for Your Indoor Air Quality Concerns

Friday, October 21st, 2011

The quality of the air inside your Robinson Ranch home is incredibly important. It has a direct impact on the health and wellbeing of your family and in some cases can affect the cost of your heating and cooling. But with so many worries out there and so many people trying to offer advice, where do you turn when you need help? Here are some resources to help you if you’re worried about indoor air quality.

  • EPA Resources – The US Environmental Protection Agency provides a huge number of resources for homeowners and business leaders worried about indoor air quality. The EPA keeps a complete list of hotlines and clearinghouses to call depending on where you live as well as a list of state health department resources according to their 10 region breakdown of the country at http://www.epa.gov/iaq/whereyoulive.html.
  • Asthma Help – If you suffer from asthma and are looking for help from an expert to handle an attack or deal with conditions leading to your attacks the Asthma No Attacks hotline is available both online at www.noattacks.org or offline at 1-866-NO-ATTACKS. The Allergy and Asthma Network is also available at www.aanma.org and the American Lung Association has a number of useful resources for anyone concerned with their lung health at www.lungusa.org.
  • Radon Help – If you are concerned about radon in your home, Kansas State University operates a number of hotlines including 1-800-SOS-RADON for test kits and 1-800-55RADON for your radon related questions.
  • School Help – For school administrators and indoor air specialists, the American Association of School Administrators has a number of indoor air quality resources at www.aasa.org/iaq-resources.aspx.
  • ASHRAE – To learn more about the standards followed by contractors throughout the United States and recommended by the EPA, visit the ASHRAE website at www.ashrae.org – the American Society of Heating and Refrigerating and Air Conditioning Engineers is responsible for evaluating new technologies and determining best practices for ventilation and air quality control.

And of course, if you are interested in the state and local regulations that affect air quality in your area, visit the California Department of Public Health’s website.

Continue Reading

How Can I Be Sure My Home’s Air is Safe? A Question from Santa Ana

Monday, October 17th, 2011

There are many ways to ensure your Santa Ana home’s air is safe to breathe, but the easiest is to have it tested regularly and to use proper filtration and ventilation. However, there are a lot of different filtration methods, so here are a few known to work best.

Air Filtration

If you have pets or a lot of plants, air filters are a great idea because they remove most of the larger particles that get into our air supply. This includes things like pet dander, pollen, mold, and other particles like dust. If you have allergies or someone in your home has asthma of any kind, this is the best way to be sure they don’t breathe anything they shouldn’t.

Air filtration is also very simple to install and inexpensive to maintain. Just be sure you opt for HEPA air filters. They are the best on the market and are certified to capture much smaller particles than any other filters, plus they tend to last quite a bit longer.

Air Purification

For big time air cleaning, you want to go with an electronic air purifier. These machines will actually ionize the air in your home to separate out smaller particles such as gas, smoke, or pathogens like bacteria and viruses. They can also capture some larger particles like mold and dust mites. The key to effective air purification is to use it in conjunction with a good air filter.

Also, consider the use of a good UV filter with your air purifier. UV filtration can be installed in your air ducts or vents to kill any unwanted pathogens as the air is circulated.

Continue Reading