Saddleback Plumbing Heating & Air Blog: Posts Tagged ‘Tustin’

Air Conditioning Question 1: What is Involved in Installing a Programmable Thermostat?

Monday, July 16th, 2012

If you’ve decided to replace your old manual thermostat with a new programmable model, you’ve made a smart choice. At Saddleback we like to keep our customers informed, so here’s what to expect when having your new thermostat installed.

First of all, location is key. Your thermostat will be installed on an interior wall, and will perform optimally when kept away from sources of heat or drafts such as heating and cooling vents, windows, doorways, and so on. To ensure that you are getting the most accurate performance out of your thermostat it should be in a spot representative of the room’s true temperature.

Your technician will most likely shut off the electricity during the installation. If the electricity is not shut off, the job is not being done safely. The fact that thermostats run on low voltage wiring does not make it acceptable to rush a job. Depending on your specific heating and cooling system you can expect to see anywhere from 2 – 10 wires at the point of connection.

If you are replacing your existing Irvine central air or heating system, we strongly advise that you also upgrade your old, manual thermostat. There is no comparing the accuracy you get from the old manual models to that of the new, programmable thermostats. Remember, with greater accuracy comes better efficiency and more effective performance levels from your heating or cooling system. Before you decide on a new thermostat for your heating or cooling system upgrade, talk with a professional. There are a lot of options out there, and you want to be sure that you are making the right purchase for your individual needs.

Also, if you’re having an old manual thermostat removed it is possible that the model may have a mercury switch inside. Mercury is a liquid metal once commonly used in thermostats to complete connections. It is also toxic. Your Irvine air conditioning technician will make sure that this substance is safely removed from your home and properly disposed of.

Upgrading to a programmable thermostat may not be a big job, but it is an important one. After all, this is the control panel you rely on to keep your home comfortable. Call the professionals at Saddleback and know that your new thermostat is properly installed.

 

Continue Reading

Tags: , , , ,
Posted in Air Conditioning | Comments Off on Air Conditioning Question 1: What is Involved in Installing a Programmable Thermostat?

AC Question: What Causes Evaporator Coils to Freeze?

Monday, July 9th, 2012

When warm temperatures arrive it is important that your Orange County cooling system is performing at peak levels. Not only do you want your home to be cool and comfortable, but you want your system to be working efficiently. One of the most common problems with cooling systems is the freezing of AC or evaporator coils. There are many factors that can lead to this problem, and eliminating these factors will ensure that your air conditioning system is up to the task of keeping you comfortable during the hottest times of the year.

First things first, it is important that your AC system be turned off if you develop a frozen evaporator coil. Prolonged operation in conjunction with a frozen coil can cause serious, unnecessary damage to you system’s compressor. Don’t let a relatively small problem become a bigger one.

Restricted air flow across the evaporator coil is a very likely cause of its freezing. If the temperature is allowed to drop below freezing, the humidity and condensation that it is evaporating will freeze up. Maintaining proper air flow is a priority. Your air filters should be replaced if dirty and the evaporator coil’s intake must be free of blockages. Also check to make sure that multiple service registers in your home are not closed or blocked off. If cooled air has no outlet it can freeze up your evaporator coil.

Check your blower motor. If it is not running your evaporator coil is very likely to freeze up. Insufficient refrigerant in your system can also be responsible. If your systems refrigerant is low, call in an HVAC technician to recharge your system and to check for any potential refrigerant leaks. If you’re running your air conditioning system when the temperature outside is low, there will not be sufficient pressure to push the refrigerant through the evaporator and the coil will freeze.

The only way to sure of what is causing your evaporator coil to freeze is by having an Orange County AC specialist investigate the problem. Don’t get stuck in the heat when warm weather arrives. Call Saddleback and get your home’s cooling system back on track.

 

Continue Reading

Tags: , , , ,
Posted in Air Conditioning | Comments Off on AC Question: What Causes Evaporator Coils to Freeze?

HVAC Tip: How Electronic Air Filter Works

Monday, April 2nd, 2012

For a long time, the most frequently used kind of air filter has been the mechanical variety, and it probably what you already have in your Orange County HVAC system. This is the kind you probably think of when you hear the terms air filter, air cleaner or air purifier. They use pleated fibrous filters in-line with an air handler to trap particles in the air before circulating it back out into the home.

Many models of these work very well and have for many years. They have the added benefit of being flexible because you can put in whatever filter you need depending on what size particles you need to trap.

However, these traditional devices are not the only option. A second kind of air filter exists for trapping particles in the air– one that does not use a fibrous filter that physically snags them out of the air on the way through.

These electrostatic — or electronic — air cleaners work in a different way to produce a similar result. The filtering component is still a fibrous sheet, but the difference is that the fibers are made of plastic, which becomes charged when air passes through it and causes friction.

(Think something like when you rub a balloon and stick it to the wall.)

These friction-charged fibers carry an electronic charge, which attracts the ions in the air around it. These ions — and the particles that they are a part of — get trapped in the fibers and stay out of your air supply.

 Electronic air filters are generally very good at trapping particles that are 1 micron in size or higher, putting them about on par with a mechanical air filter that carries a MERV rating of 12. The electrostatic method works well for many common household air pollutants, such as dust, pollen, mold and pet dander.

As with many ventilation-related decisions, the choice of what kind of air filter is right for your Orange County air conditioning and heating system depends on your needs and those of your family. If you are having trouble deciding, then an air quality assessment and consultation with Saddleback Plumbing, Heating & Air Conditioning can be a good way to reach a decision.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on HVAC Tip: How Electronic Air Filter Works

What Dana Point Residents Can Do When a Heat Pump Isn’t Operating Properly

Wednesday, February 8th, 2012

A heat pump in Dana Point is designed to provide steady, reliable heat in your home throughout the year. So, what do you do when your heat pump suddenly stops producing enough heat? The first step is to figure out why exactly your heat pump has stopped working properly. From there, you can take action to get it back on track.

Reasons Your Heat Pump Isn’t Producing Heat

There are a number of reasons a heat pump might stop producing enough heat. Here are some of the most common ones you’ll encounter:

  • Too Cold Outside – A heat pump can only handle temperatures so low. Most heat pumps are rated for outside temperatures as low as 40 degrees F (though they work best at 50 degrees F and up). If the outside temperature gets below the 37 degree F mark, it’s likely the system won’t be able to produce enough heat. Remember, however, that you should have an emergency heat source. If it isn’t on but the outside temperature is below 37 degrees F, you may have a problem with the outdoor thermostat or emergency switch.
  • Fans – The fans on your heat pump may not be working properly. Simply check this by increasing the thermostat setting on your heat pump. If the fan never comes on, there could be an electrical or mechanical problem in your fan.
  • Thermostat Readings – A simple problem that can stall your heat pump is thermostat failure or calibration problems. Check the thermostat to see if it is working properly and if not, call a professional.
  • Refrigerant – If the refrigerant gets low in your heat pump, you may need to have it recharged. This is a quick and relatively inexpensive process so call for professional assistance as soon as you notice the problem.

If your heat pump isn’t working properly, don’t wait for it to break completely or for the temperature outside to become unbearable. Contact Saddleback HVAC experts for help immediately and get your heat pump fixed before it’s too late. Even a seemingly simple problem can quickly turn into a major issue if it isn’t dealt with immediately.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on What Dana Point Residents Can Do When a Heat Pump Isn’t Operating Properly

Common Garden Grove Furnace Problems

Monday, January 2nd, 2012

When it comes to your home Garden Grove furnace, you simply want it to work all of the time. But just like any other piece of equipment, your furnace will have problems from time to time. A few of these are relatively simple to fix on your own, but for the most part you’ll need to call in someone to take care of the repairs for you.

However, before you can do that, you’ll need to recognize that a problem exists at all. And the earlier you notice the warning signs, the better off you’ll be. It’s always better to get a furnace problem taken care of right away than to wait until your furnace stops working completely.

It’s also good to remember that quite often the problems you’re having with your furnace are really originating with your thermostat. This is usually welcome news, as thermostats are much cheaper and easier to repair and replace than many other parts of your furnace. In fact, even if your furnace isn’t working at all, it may only be the result of a faulty thermostat.

Another problem you may start to notice is that one part of your Garden Grove house is being warmed more than another part. When this happens, it can be a sign that there is something wrong with the furnace, but it may also be that the pressure in your duct system is not balanced properly. A simple rebalancing of this system can have your house heating evenly again in no time.

You may also realize that your furnace seems to be cycling on and off too often. When a furnace is working properly, it will come on for a considerable period of time and then shut off until the temperature in the house drops below the desired level. However, some problems can cause your furnace to complete many short cycles rather than fewer short ones.

If this is happening to your furnace, there are several possible causes. Something might be wrong with the blower on the furnace or the thermostat might not be feeding the furnace the correct information. Another possibility is that your furnace’s air filter is dirty or clogged.

While there are sometimes simple and straightforward solutions to these types of common furnace problems, it’s best to call in a Garden Grove professional to have them take a look if you’re not sure where to start searching for a problem. In most cases you’ll need them to come out and make the necessary repairs anyway.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Common Garden Grove Furnace Problems

Furnace Safety: Some Advice from Saddleback Plumbing

Wednesday, November 16th, 2011

There are many advantages to a properly operating furnace; the most important are the safety and comfort of your Northwood home’s occupants. There are several things you can do to ensure the safe operation of your furnace.

Here is a checklist of ideas:

  • Clean or change furnace filters on a regular basis. Replace disposable filters and clean permanent filters using water or cleaning solutions. Your owner’s manual or a qualified heating contractor can suggest a regular maintenance schedule.
  • Check the exhaust vent from the furnace. Clear obstructions such as leaves, clothing, or animal nests from the vent pipe or chimney. Keep roof exhaust vents clear of snow. If there is a faulty exhaust system (like a blocked flue), of if there are cracks and leaks in the pipes or improper adjustment of the burner, or if there is lower air pressure indoors than outside, the furnace can create serious indoor air pollution.
  • A clear air intake is important too, since furnaces need fresh air to “breathe” and complete the fuel burning cycle. Again, check for debris, snow, or animal nests in intake pipes.
  • If you have an older gas furnace, you may want to install a supplementary induced-draft fan that reduces the possibility of backdrafting. Some furnaces have automatic shutoff devices that turn off the furnace if it begins to backdraft.
  • Check internal components such as the blower motor and vacuum any dirt. Check belts and pulleys for excessive wear. You should consult your owner’s manual for any suggested maintenance tips on internal working components.
  • You may also want to check the pilot light to see if it is working and if it producing an even, blue flame. If the flame is uneven, it may be a sign of incomplete gas combustion, which can result in the creation of dangerous carbon monoxide gas.
  • Ensure that your thermostat is operating correctly by raising or lowering the temperature settings to make sure the furnace cycles on and off.
  • Install and maintain battery or hard-wired smoke and carbon monoxide detectors.

Externally vented natural gas furnaces, when properly designed and installed, will operate safely for years. But if you detect a problem, use the most common solution – contact a qualified heating professional to check out your furnace.

Continue Reading

Tags: , , , , , , ,
Posted in Services | Comments Off on Furnace Safety: Some Advice from Saddleback Plumbing

The Beauty of Zone Heating: A Tip from Brea

Monday, November 7th, 2011

While it might not technically be a necessity, there are a lot of reasons why you might want to look into having a zone heating system installed in your Brea home. Whether you’ve been using the same home heating system for a long time or are looking to have a new one installed, there’s never a bad time to have a zone heating system put in.

Most people think that the only thing that affects their home heating and cooling bills is the energy efficiency of their furnace. However, that’s simply not always the case. Certainly, the more efficient your furnace or heat pump is, the lower your energy bills will be. But that doesn’t mean they’re as low as they could possibly be.

After all, if you don’t have a zone control system installed, you’re paying to heat your entire house every time you turn on the heat. Depending on the size of your house, that could mean you’re heating anywhere from two to 10 rooms or more that are unoccupied at the time. In fact, you could be paying to heat an entire empty wing of your home. And while you’ll pay less than you would if your heating system was less efficient, you’re still paying more than you need to.

With a zone control system, you can heat your home much more efficiently because you can control which areas of the house get the heat and which ones don’t. You can set multiple different temperatures for the different zones of your home, which allows you to keep the occupied areas warm while not forcing you to waste energy to heat unoccupied spaces.

Aside from the economic benefits of only heating the areas of your home that you need, zone control systems also can put an end to some of those contentious thermostat wars that go on in so many households. If the members of your household can never agree on what a comfortable temperature is, they can simply each set their own temperature for their own area of the house.

That way, everyone is happy and no one has to suffer uncomfortably. After all, you paid a lot for your state of the art home heating system. It’s only fitting that you should be able to get the most possible out of it.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on The Beauty of Zone Heating: A Tip from Brea

It’s Time for a New Furnace: a Tip from Saddleback Plumbing

Wednesday, November 2nd, 2011

Replacing your furnace in your Santa Ana home is probably not something you want to think about. After all, a new furnace is a big investment and not something you probably have too much experience with. And sometimes having your current system fixed or tuned up is all you need to get your home heating situation back on track. But there are certain situations in which it makes more sense to just go ahead and get a new furnace rather than simply patching up the old one.

For instance, if you have to call for either minor or major repairs to your furnace on a regular basis, it’s probably time to consider investing in a replacement. All of those repairs cost money and chances are that the furnace you’re paying repeatedly to replace isn’t going to last that much longer anyway.

Rather than continuing to dump money into a furnace that just isn’t cutting it anymore, you’ll be better off making the investment in a new unit. The truth is, you’re going to have to do it sooner or later and by buying a new furnace now, you’re actually saving all of the money you would have spent on repairing the old one for another year or so.

Also, a furnace that requires such frequent repairs is probably not functioning all that efficiently either. When you replace it with a newer model, you won’t just save money on repairs. You’ll also likely notice a considerable savings on your monthly energy bills because of how much more efficient your new model is.

Even if you haven’t been repairing your furnace often, you may be able to notice some signs that the old unit isn’t quite up to the task anymore. If you’re suddenly having some significant humidity problems in your house or if your home isn’t being heated evenly, there’s a good chance your furnace is on its way out.

And, in fact, even if your furnace is functioning just fine but is more than 10 years old or so, it’s very likely you’d benefit by replacing it. That’s because the newer furnaces available now are so much more energy efficient than their predecessors that the savings you’ll incur monthly will quickly make up for the initial installation investment.

Of course, you don’t want to get rid of a good furnace if you don’t have to. But if your furnace is getting close to the end of its expected lifespan, you may very well benefit by putting out the money for a new one now so you can start saving right away on your monthly energy bills.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on It’s Time for a New Furnace: a Tip from Saddleback Plumbing

Key Components for Annual Maintenance of Your HVAC System

Wednesday, October 5th, 2011

Annual service checkups are an important component of your HVAC system’s ongoing operation in Fullerton. Without these checkups, the system may not run properly. While there are some tasks you can perform yourself, most of the vital maintenance tasks need to be performed by a professional annually.

As you look for a contractor to perform your annual maintenance, make sure you find someone who will perform each of the most important tasks listed below for your system each year:

  • Electrical Connections – These should be tightened, tested and replaced as necessary.
  • Thermostat – A professional thermostat calibration ensures the system runs at the right temperature throughout the summer.
  • Control Panel – The control panel is checked for error codes and recalibrated to ensure it continues running as intended for another year.
  • Blower Parts – The fan and motor are checked and serviced as needed. Replacement parts are installed.
  • Condenser Coils and Evaporator – Both are cleaned and checked for signs of wear. Any bent coils are repaired.
  • Gas Connections – An inspection of your gas lines, if applicable, is made. Additionally, if you have electrical components, they will be checked for damage.
  • Exchanger and Combustion Components – If you have a packaged system, these are checked for the entire system.
  • Refrigerant Check – If you have a refrigerant filled air conditioning system, it will be checked to ensure levels are high enough for another summer.
  • Air Filters – While you can do this yourself each month, a professional will check permanent and replaceable filters for wear and tear.
  • Moving Parts – All moving parts are inspected, oiled, and checked for damage. If a part needs replacement it is done now to avoid future problems.

Good annual maintenance is necessary to keep your system running smoothly year round. While there are plenty of cleaning tasks you can perform each month, the most important tasks are those performed by your contractor.

If you are interested in learning more about how maintenance will be performed on your system, call your local contractor today.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Key Components for Annual Maintenance of Your HVAC System

Steps to Take When Your HVAC System Breaks Down

Friday, September 30th, 2011

Imagine this – it’s a sweltering summer day. The only place you want to be is on the couch in your Tustin home with the cool air conditioned air being blown across your face. Sounds pretty good doesn’t it? Now, imagine what happens when that cool conditioned air stops flowing.

A breakdown in your HVAC system is the absolute last thing you want to experience on a day where the mercury dings 90+ but it can happen, and the only way to ensure things don’t get out of hand is to take the following steps.

  1. Check Common Problems –While the system itself could be broken, make sure there are no other issues involved. Frequently, the electricity supply can be interrupted by a power surge or a tripped breaker. In both cases, you can usually get the system back online by yourself. However, you should call an electrician to inspect it as soon as possible.
  2. Does it Turn On – If the air conditioning system turns on and simply doesn’t provide enough cooling for your home, it is likely a problem in the unit. In this case, check other common problems. Clogged filters can severely reduce efficiency and if the system freezes over, it may stop providing enough cooling.
  3. Still Not Working? – If the system refuses to turn on and there are not clear problems that you can fix yourself, it’s time to call a professional. A professional HVAC contractor should be available almost any day of the week for emergency calls like this. Of course, in the middle of a heat wave or cold snap, it’s very likely that they may be booked up for a couple days. To avoid this happening, have routine maintenance done as often as recommended to avoid the possibility of being without cooling or heating indefinitely.

A good HVAC system is the only thing standing between you and discomfort, or worse, danger to your health. Don’t let the system go into such disrepair that you can’t use it at all.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Steps to Take When Your HVAC System Breaks Down