Saddleback Plumbing Heating & Air Blog: Posts Tagged ‘Yorba Linda’

Shower Installation: Prefabricated vs. Tile

Monday, April 11th, 2011

There are quite a few things to consider when you are choosing a type of shower installation. Whether you are simply redoing an older shower or are having a new one completely installed, you will have to decide whether you want to go with a prefabricated installation or a more traditional tile interior. Both of these types of installations have their own sets of advantages and disadvantages, so determining which one is right for you will have a good deal to do with the particulars of your situation.

Prefab installations are generally made out of fiberglass or acrylic, making them lighter and less expensive than the tile alternatives. This is always great if you are on a budget, and it can benefit you in other ways as well. For instance, if you are trying to install a shower in an area without substantial floor support, a prefab installation is ideal because the shower stall simply does not weigh that much.

But prefab shower installations also have their drawbacks. They are not as versatile, particularly the one-piece installations, and they are only available in a set number of sizes and styles. And while you can touch them up to a certain extent when cracks develop, the likelihood is higher that you will have to replace a prefab unit sooner than you would a tiled one.

Tiled shower installations are certainly more labor intensive to design and install. And this, of course, means that they cost more overall. But they also offer you a much wider range of design and installations possibilities. They can be made to fit any space and are especially convenient when you are remodeling your home because the materials used can easily be carried through spaces large and small.

If you are looking for a do-it-yourself project, however, a tile shower installation may not be for you. While it is possible to complete this type of project on your own, there are a lot of factors you will have to take into account. Also, the work takes much longer than a prefab installation would. The end result may be much more pleasing, but you will definitely have to work for it.

And even if you have professionals install your tile shower, it will take more than the one day the prefab installations usually take. So before you set your shower installation choice in stone, take some time to carefully consider the pros and cons of each.

Continue Reading

Installing Drainage System: Why Call a Plumber?

Friday, March 11th, 2011

A proper drainage system is a great asset when you are trying to improve the appearance of your lawn or increase your landscaping options. A lawn that does not drain right will have dry and wet spots that make it difficult for plants to grow. Your lawn will develop a spotty appearance because of these types of areas and you will probably also have a smaller area to work with in general.

With a good drainage system, on the other hand, you can make use of your entire yard. As long as water can reach all areas but does not linger too long in any one of them, all of your plants should be able to grow nicely. This is often a project that handymen are inclined to take on themselves, but there are several potential pitfalls when you do. It may not seem all that complicated to put in a drainage system, but you do need to know what you are doing if you want to get the job done right.

In order to function properly, a drainage system needs to be installed on a slope. Water will always run downhill, so making your drainage system run downhill will ensure that gravity will do all the work for you. If the proper slope is not maintained, however, there are plenty of areas where water can pool.

That is exactly the type of situation you are trying to avoid by putting the drainage system in, so all of your hard work could be for nothing if you do not get the slope calculated correctly. While this type of measurement and calculation can be challenging for you, it is second nature to a professional plumber. Hiring an expert to help you with this area of your drainage system is the best way to make sure you have the right setup planned.

You will also need to know where to lay out the drainage system. This involves analyzing the sources of water in your yard and understanding what you need to do to move it from one area to another. Again, this can be a challenging if not overwhelming aspect of the project for a layman, but for a professional it is simply part of the job.

On top of all of that planning, you will need to have the right tools and materials to put the drainage system together. Plumbers already have all of this on hand and they know which tool to use when. Your project will go much more smoothly and you will be assured of much better results if you use a professional to install your drainage system.

Continue Reading

Compression vs. Cartridge Faucets

Friday, February 18th, 2011

If you are like most people, you probably do not think too much about what goes on inside your faucet when you turn it on and off. All you need is for the water to flow when you want it to and to stop when you do not. But when the time comes to replace or repair one of the faucets in your home, it is helpful to know a little bit about how the different types of faucets work and what the pros and cons of each can be.

The oldest and most common types of faucets are compression faucets. When one of these faucets is in the off position, a small washer inside creates a seal that keeps water from flowing through and into the tap. But when you turn the faucet on, the stem inside raises up, which takes the pressure off of the washer and breaks the seal. That allows the water to flow until you lower the stem back down again by turning the faucet off.

These faucets are generally easy to find and relatively cheap. They are also easy to install or repair on your own, and this is fortunate because they do tend to develop leaks periodically. That is primarily because the washer inside will wear out over time and need to be replaced. This is a rather straightforward and simple process, but if you do not want to have to deal with it, you may want to consider your other option.

The other main type of faucet on the market today is a cartridge faucet. Instead of washers, these types of faucets employ a cartridge which seals to the faucet base with several O-rings. These types of faucets can often be quite a bit more expensive, although you can certainly find some that are reasonably priced. They are also much less prone to developing leaks, and when they do they are quite easy to repair as well.

Continue Reading

Why Is There a Sewer Smell in Our House?

Friday, February 11th, 2011

Detecting a sewer smell in your house is never pleasant on a number of levels. Of course, the main thing you are most likely concerned about is that the smell makes it hard to be in your house. After all, who wants to live in a place that smells like a sewer?

But there are other reasons to be concerned when you smell something like this as well. For one thing, since this is not the way that your house should smell, it likely means that there is a problem somewhere in your sewer, drainage or venting system. Also, gasses that generate that sewer smell can be made up of methane and hydrogen sulfide, both of which are quite dangerous and not the types of gasses you want your family to be breathing on a regular basis.

In most cases, you will need to call in a professional to determine the exact cause of the sewer smell and eliminate it. This can sometimes be expensive if the problem is widespread or difficult to locate, but it does not have to be. Some causes of a sewer smell in your house are relatively easy to remedy, particularly for an experienced professional.

For instance, the smell may be the result of leaks in certain pipes and can be eliminated when those leaks are repaired. Or a low water level in your toilet could be the culprit. The constant presence of water in your toilet bowl is actually what keeps those sewer gasses from seeping up and into your house. So if the water level in the toilet bowl drops for some reason, the gasses can be allowed to escape into your house. This is especially likely if you have a toilet that does not get used often and where the water may have evaporated over time.

Another common reason that a sewer smell can develop in your house is that the vent pipe has become clogged. Since it is the job of this pipe to vent sewer gasses out of your home, it is not surprising that a blockage in this system could cause the odors to build up inside. Depending on your skill level, you may be able to tackle the project of unclogging the vent pipe on your own or you may need to call in a professional plumber to get the job done.

Continue Reading